Results 1 to 2 of 2
-
29 November 2011, 15:23 #1Manufacturer
- Join Date
- Feb 2010
- Location
- Pahrump Nevada
- Posts
- 19
- Downloads
- 0
- Uploads
- 0
Magna-Matic CRT-14 M1A/M14 carbon removal tool
The CRT-14 is new for 2011 is first tool in the industry to address complete carbon removal from the gas system of M-14 / M1A platform rifles. Previously the only options available to M-14 operators were drill bits, which can easily alter the dimensions of the gas system components. The CRT-14 is a professional tool specifically designed to remove the carbon from the very difficult-to-clean cavities of the M-14 / M1A gas system. The assurance of the dead-stop reamer design will prevent damage during cleaning.
The CRT-14 is made up of 2 parts. The flat wrench has a hex that fits the gas system plug, and the other-side has a circle with a flat to match the rear of the gas piston. This allows the user to effectively rotate the CRT-14 dead-stop reamers inside the deep cavities of the gas piston to ensure complete carbon removal. The CRT-14 has 3 specific dead-stop reamer ends to clean the two cavities of the gas piston and the gas system cross-hole, and the gas system plug. Just like the CRT-15 and CRT-25 the dead-stop reamers prevent damage to the gas system proper dimensions.
CRT-14 will clean the M-14 / M14SE / MK14 SEI / M1A / SOCOM 16 / Polytech M14 / M25 White Feather rifle platforms
$41.99
Get it here: http://www.magna-matic-defense.com/C...y-p/crt-14.htm
Daniel Jaquish
Gunsmith/ Sales Representative
Magna-Matic Defense
http://www.magna-matic-defense.com
C: 920-889-8669
F: 920-564-2366
-
29 November 2011, 15:26 #2Manufacturer
- Join Date
- Feb 2010
- Location
- Pahrump Nevada
- Posts
- 19
- Downloads
- 0
- Uploads
- 0
Cleaning the large cavity of the gas piston.
Cleaning the small cavity of the piston.
Cleaning the cross hole.
Cleaning the plug.Daniel Jaquish
Gunsmith/ Sales Representative
Magna-Matic Defense
http://www.magna-matic-defense.com
C: 920-889-8669
F: 920-564-2366