Results 1 to 5 of 5
Thread: 300 Blackout help
-
9 January 2012, 19:40 #1Member
- Join Date
- Feb 2009
- Posts
- 5
- Downloads
- 0
- Uploads
- 0
300 Blackout help
Looking for some help here guys.
here is what i have bushy upper, lower, bcg etc
also have an aac cyclone-k
just need a barrel and rail
want to register the lower and build a 300 blackout
mainly for fun but also for shooting some pigs, will also keep close to the bed to protect the family
any suggestions for a barrel?
consfused with the options as to 8, 9, 9.5 or 10in
also need a rail, strongly considering getting a longer rail that the can fits inside any down side
could i fire a few rounds through this set up, say if i wanted to hunt deer with the can off?Last edited by bates; 9 January 2012 at 19:49.
-
9 January 2012, 21:16 #2
Have you checked out the 300 Blackout Forum? You'll get more help there.
-
10 January 2012, 15:23 #3Manufacturer
- Join Date
- Jul 2009
- Location
- OR
- Posts
- 91
- Downloads
- 0
- Uploads
- 0
I would choose the barrel length based on the OAL or handguard length you prefer. I don't care for the silencer to be in the handguard, it looks cool but in reality it gets hot very fast while shooting and I don't like the feel of the larger diameter handguards.
8" barrel = 7" handguard
10" barrel = 9" handguard
-
30 May 2012, 21:19 #4
Look at Noveske for barrels. As for bbl length, my personal choice is the 14.5 or 16.
http://noveskerifleworks.com/cgi-bin...ay.cgi?cat=168
-
31 May 2012, 23:34 #5