Results 1 to 5 of 5
-
30 April 2008, 11:22 #1
NOT FOR RECTAL INSERTION (PWS piston content)
I know you folks are into the new whiz bang gadgety stuff, so you might dig this....My new SBR (first sbr) build. complete with the SMOS arms billet lower and PWS piston retrofit system. And a little home mixed norrels.
TODD at PWS being the funny man that he is decided to engrave a special message in my gasblock
magpul CRT stock
CMT mil dimension buffer tube
Troy rear BUIS
Magpul MIAD grip
CMT ambi selector
PRI gas buster CH
RRA 2 stage NM trigger
FN LPK
KNS gen2 anti rotational pins
SMOS billet lower receiver
LMT 10.5 inch upper (bbl/receiver)
Larue Tactical 30mm flip mount with Hendsoldt 3x magnifier
Larue Tactical M68 30mm Aimpoint Mount with Aimpoint M2
Larue Tactical 7inch free float railed handguard
Larue Tactical flashlight mount
Pentagonlight x3 modified with USWOH P4 Seoul emitter, producing ~210 lumens.
Pentagonlight tapeswitch
Tangodown battlegrip vertical foregrip
Larue Tactical vertical foregrip
Yankee Hill machine Phantom Stainless 223 suppressor (waiting on)
PWS piston retrofit kit
_______________________________________
Visit HDI for all of your AK needs.
-
30 April 2008, 13:53 #2Member
- Join Date
- Oct 2007
- Location
- Republic of Texas
- Posts
- 332
- Downloads
- 0
- Uploads
- 0
Beautiful. Is the furniture straight Magpul FDE?
TS
-
30 April 2008, 15:40 #3
yes. all of the plastic stuff is magpul FDE.
I had to add some black to the norrels tan/FDE to darken a bit, to better match the MP stuff.
Here is a pic out in the sunlight, that gives a better idea of the color. it actually matches very well in person. I also messed with my VFG position in this latest pic. I also need to figure something different with my light. the pentagonlight seems HUGE on a shorty, and i am afraid of torching the bezel with muzzle blast in its current position. i might have to downgrade to a smaller pistol-type light like the m300 or the insight procyon.
_______________________________________
Visit HDI for all of your AK needs.
-
30 April 2008, 17:27 #4
Looking good. We just got the piston kits in and I installed 2 for evaluation and they turned out great. Let me know what you think of the piston after some rounds down range.
-
1 May 2008, 13:04 #5
DEAN from pws came down to Henderson Defense a few weeks back and set up the shop as certified installers. we retrofitted a shop gun and they took them out to the range. Ran nearly 1000 rds, a good percentage on the 16 lower, dumping mags. Not one hitch, and all parts tight and true afterwards.
Im pretty excited about this kit, and i think it is going to be very popular._______________________________________
Visit HDI for all of your AK needs.