Results 16 to 30 of 35
Thread: sling question
-
4 June 2008, 09:23 #16Member
- Join Date
- Oct 2007
- Location
- Republic of Texas
- Posts
- 332
- Downloads
- 0
- Uploads
- 0
It depends on what your setup is.
TS
-
4 June 2008, 11:35 #17
-
4 June 2008, 12:05 #18
-
4 June 2008, 14:34 #19Member
- Join Date
- Oct 2007
- Location
- Republic of Texas
- Posts
- 332
- Downloads
- 0
- Uploads
- 0
GS auxilliary ends with the QD's attached would be more streamlined but standard ends plus QD should work fine.
TS
-
4 June 2008, 17:52 #20
One of the officers I work with has been using an adjustable 2 point, and he disliked the long webbing so much that he taped it down to prevent it from getting caught up.
I showed him the GS-2P on my duty carbine, and his comment was simple "grab me one, I'll pay you whatever it costs".
-
7 June 2008, 20:45 #21Member
- Join Date
- Oct 2007
- Location
- Republic of Texas
- Posts
- 332
- Downloads
- 0
- Uploads
- 0
It just hit me that I could set my POF up to use the GS 2PS using the auxiliary tab hooked to the SPRE and the extra standard auxiliary tab that I got with the GS 2PS. I need to take some pics as well.
TS
-
30 October 2008, 19:58 #22Member
- Join Date
- Oct 2008
- Posts
- 1
- Downloads
- 0
- Uploads
- 0
Is there anything wrong with the way I attached the front sling mount? It seems to handle all of the weight that I pulled on it.
Yes it was a pain to put the tab on the inside, but it looks cleaner.
-
31 October 2008, 07:36 #23Is there anything wrong with the way I attached the front sling mount?
Yes it was a pain to put the tab on the inside, but it looks cleaner.
-
13 November 2008, 13:25 #24
Talking about Gear Sector shirts.................
I wear the 2 that I have constantly, they are the most comfortable T-shirts around-
-
15 November 2008, 15:43 #25
I cant wait for the Gear Sector hats..
CXS
-
16 November 2008, 18:10 #26Member
- Join Date
- Nov 2008
- Location
- Warner Robins, Ga
- Posts
- 3
- Downloads
- 0
- Uploads
- 0
[QUOTE=morebullets;4878]Is there anything wrong with the way I attached the front sling mount? It seems to handle all of the weight that I pulled on it.
Yes it was a pain to put the tab on the inside, but it looks cleaner.
QUOTE]
I tried putting mine on like that for about 15 minutes. I was making up curse words on the fly. I gave up. It does look a lot cleaner that way.
I have another one on order for another carbine and I'm going to put it on that way if it kills me.
-
17 November 2008, 06:46 #27Member
- Join Date
- Nov 2008
- Location
- Warner Robins, Ga
- Posts
- 3
- Downloads
- 0
- Uploads
- 0
After seeing the way Morebullets had his adaptor on I decided if he can I can.
I did a bit of thinking last night on the matter, and this morning I put my thoughts to work. Took about 4 minutes.
I will try to explain the way I did it because it not only looks better, I think it is better installed this way. No loose ends sticking out to do whatever.
First thing I did was remove the adaptor from my sling mount (Burnsed loop).
Thread the webbing through whatever adaptor you are using all the way till the stitched part runs into your adaptor. All that webbing going through the adaptor will be your friend in just a minute.
Second thing is to thread the webbing back through the first ring, up over the second or outer ring, and then of course stick back into the middle.
This where it may get tricky to explain. While holding the webbing and buckles up close to your adaptor with one hand, put pressure on the webbing end. Now start pulling the slack out of the non stitched side and if everything goes right. The webbing itself will pull the end through the inner loop.
Mine pulled though about 1/8 inch. Then take some needle nose pliers, your wifes tweezers or some hemostats and pull it on through.
Worked first time for me and I'm getting old and my hands don't work like they used to, so you youngens shouldn't have any problem at all.
Much neater setup.
And a few pics just to show it can be done (really it is easier than it looks).
Last edited by Elvis; 17 November 2008 at 12:05.
-
26 December 2008, 10:11 #28
Shirts? Patches? Don't got none of these them thar things.
Slings I got....
-
26 December 2008, 15:59 #29
I'm gonna need one of those Gear Sector shirts to wear at SHOT show..
Too bad my girl left me but I'll still need that thing we discussed. Got the rifle back and the next girl might get it..
CXSLast edited by Custom-X_Sponjah; 26 December 2008 at 16:04.
-
26 December 2008, 16:26 #30I'm gonna need one of those Gear Sector shirts to wear at SHOT show.
Too bad my girl left me but I'll still need that thing we discussed. Got the rifle back and the next girl might get it.