Results 1 to 11 of 11
-
18 June 2008, 08:40 #1
Charles Daly Defense 6.8SPC????????
I was just going to call Charles Daly Defense directly or send them an IM, but I just wanted to start a thread to see if there was any interest.
Charles Daly Defense: I know you guys are just starting out with the 5.56 AR's, but would you guys be interested in making some 6.8SPC uppers? With the right specs, I don't think you guys would have any problems selling them.
These are just my thoughts:
1. 14.5" chrome lined barrel with the 1:11" twist, 4-groove, and SPCII Chamber with the carbine length gas system.
2. 16" chrome lined barrel with the 1:11" twist, 4-groove, and SPCII Chamber with the Mid-length gas system.
3. 20" chrome lined barrel with the 1:11" twist, 4-groove, and SPCII Chamber with the Rifle-length gas system.
The profile that like is like the Government Profile (.700" under the handguards).
I'm on my 4th 6.8SPC barrel and they all have the 1:11" twist and SPCII Chamber.
What do you guys think?
Charles Daly Defense, if you want to discuss this off-line, just send me an IM and I'll give you my contact info and I can help you with anything you need.
-
25 June 2008, 21:12 #2Charles Daly Guest
I don't know how I missed this post but somehow I did, so sorry for my long delay in replying.
We do have interest in offering 6.8 uppers and thank you for your suggestions.
I would like to discuss this with you further. How about giving me a call at my office Thursday or Friday of this week. (Anytime after the Supremes rule on Heller tomorrow.) You can reach me toll free at 866-DalyGun (325-9486).
Thanks again and I look forward to speaking with you.
Sincerely,Last edited by Charles Daly; 26 June 2008 at 18:42.
-
26 June 2008, 17:41 #3
Thanks for the reply. I'll see if I can give you a call tomorrow (Friday) after I'm finished with SWAT Training.
Here is my new 14" 6.8SPC. Sorry the picture isn't in the Stickman class
-
26 June 2008, 20:05 #4Member
- Join Date
- Oct 2007
- Location
- Republic of Texas
- Posts
- 332
- Downloads
- 0
- Uploads
- 0
Don't feel bad. There aren't any people in Stick's class photography wise. The rest of us just have to make do...
TS
-
30 June 2008, 13:49 #5
Mr. Kassnar, it was a pleasure talking with you. If you need any help, give me a call. I think a 16" chrome lined barrel with the 1:11" twist, 4-groove, and SPCII Chamber with the Mid-length gas system would be the best place to start, followed by the 14.5" barrel.
Good luck with it and I hope Art was able to help you out.
-
30 June 2008, 14:04 #6Charles Daly Guest
-
30 June 2008, 14:08 #7
-
14 September 2008, 07:06 #8justbill Guest
Mr. Kassnar,
Is there any updated news on the 6.8 project you can discuss at this time?
-
14 September 2008, 10:57 #9Charles Daly Guest
The only update I can give you is to say that like most new projects, this one is no exception and is taking much longer than originally anticipated. It isn't so much the 6.8 istelf that is the problem but rather the other projects in line ahead of the 6.8.
We have to finish the launch of our lightweights, A4's, and LW Middy, all in 5.56, before we can get to the 6.8, and I should add, the 6.5G.
I wish I could give you something more concrete, but at this point it is anyones guess. Perhaps November?
I will let you know when I have more specific information.
Sincerely,
-
14 September 2008, 14:22 #10
Better to stay on target with solid products than to get in a rush. I think everyone here feels the same in that respect.
-
20 September 2008, 21:21 #11Member
- Join Date
- Oct 2007
- Location
- Republic of Texas
- Posts
- 332
- Downloads
- 0
- Uploads
- 0