Results 1 to 12 of 12
-
11 March 2013, 11:41 #1
First Look - Fortis Manufacturing 14" REV™ Rail - Prototype
I do not have a lot of information on the mid-length version of the Fortis Manufacturing Mid-Length REV Rail, though from my measurements, it is approximately 14.75" in overall length and somewhere around 11oz from my non-digital scale.
ETA: Just received an update from Fortis Mfg that stated that the rail is measured at 14" and weighs 10.4oz in the raw.
Here is a teaser photo of the prototype:
*Note...the rail does not have an anodized finish on the prototype.
-
11 March 2013, 11:48 #2
-
11 March 2013, 15:40 #3
How is it a midlength at almost 15"?
-
11 March 2013, 20:20 #4
-
1 April 2013, 22:57 #5Member
- Join Date
- Apr 2011
- Posts
- 30
- Downloads
- 0
- Uploads
- 0
Awesome! I think DD has some work to do.
-
23 April 2013, 15:19 #6Member
- Join Date
- Jun 2011
- Posts
- 5
- Downloads
- 0
- Uploads
- 0
do you know if there will be a model made for HK416/MR223/MR556?
-
24 April 2013, 19:16 #7
-
31 May 2013, 06:23 #8Member
- Join Date
- May 2013
- Posts
- 5
- Downloads
- 0
- Uploads
- 0
Anyone know if it'll fit on an LWRC upper?
-
3 June 2013, 05:39 #9
-
3 June 2013, 08:16 #10Contributing Member
- Join Date
- Dec 2009
- Posts
- 450
- Downloads
- 0
- Uploads
- 0
It would not fit out of the box on my M6A2. Looks awesome, but the piston cup is too wide for the top part of the rail. There is a guy on the LWRCi forum that made it work, but he must have better machining skills than a dremel tool and some cinder blocks to hold it in place.
SOS
-
14 August 2013, 13:44 #11
This rail is now available in FDE on their website Fortis MFG
-
15 August 2013, 18:33 #12
Comp,
Good catch, yes they are available on Fortis Manufacturing and Rainier Arms' websites. MSRP $294.95