Results 61 to 75 of 91
Thread: Noveske weapons and components
-
19 December 2015, 20:06 #61
-
19 December 2015, 22:28 #62
-
19 December 2015, 22:37 #63
It actually co-witnesses well with the irons. It's a primary arms and has held up alright and still holds zero. Hating on my budget optic
Last edited by velocity2006; 19 December 2015 at 22:49.
-
19 December 2015, 23:10 #64
-
20 December 2015, 00:09 #65
-
20 December 2015, 09:09 #66
Alright, well never really paid attention, but it does sit lower than normal co-withness, I guess you could call it an upper 1/3 co-witness lol. Never really noticed as I always shoot non-magnified optics with both eyes open and generally can kind of drown out the body of the optic visually.
This is looking through the rear, I can still place the dot on the tip of my irons while looking through them.
I can hit a 6 inch plate at 100 with this set up all day long, so it does work lol.
-
20 December 2015, 09:26 #67
I think I have an Aimpoint ACO mount somewhere that you can have, if you want to properly set that up.
-
20 December 2015, 09:28 #68
Sure, would appreciate it. Optic has been solid, but you're right the mount is a little off lol. Never noticed it until now.
-
22 December 2015, 04:48 #69
-
22 December 2015, 05:37 #70
My precision setup based around a Noveske 18" SPR barrel.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
22 December 2015, 05:53 #71
-
22 December 2015, 06:24 #72
-
23 December 2015, 00:49 #73
Hey guys,
I joined the forum back in September and took about a 3 month hiatus shortly thereafter. I'm in the process of looking for a new job and just haven't had much time for forums other than buying and selling stuff over on the Hide. I've spent the past hour or so looking through the forum and I have to say, I'm glad I came back. SnipersHide has the edge when it comes to quantity of content, but can't hold a candle to the quality of content y'all have here. I'm glad to say I'm back, and hopefully for good this time! Right before I left, I asked for help with my photography and received lots of good info. I've definitely improved since September, but my pictures are still FAR from where I want them to be in terms of quality. I'm confident that I'll get there eventually though. I thought I'd start off by posting a couple pictures of my Noveske that I've taken recently. I'm using a Canon Rebel XTI with a 17-55mm lens.
- Josh
-
23 December 2015, 00:55 #74
-
23 December 2015, 09:26 #75
Nice photos! And nice job on the stippling of the KAC logo.