Spool Tool by Tricorne

[zero7one]

Though this is not directly a weapon or weapon accessory, anyone who has spent any time in the military or who has had even an itch of survival skills has heard of or used Paracord (aka 550 cord).

A new company has entered the scene, Tricorne, which is named after the three cornered hat (pictured below) worn by the patriots that founded our great nation.





The fine folks at Tricorne have created the "Spool Tool" (Patent Pending) which is, per their Facebook Page, "a device that is used for storing, cutting, measuring, and finishing Paracord and other rope, cord, line, string, and twine." The "Spool Tool" is 100% made in the U.S.A. Tricorne is an LLC based out of San Diego, CA and is a veteran owned and family operated business.



From Tricorne:

The Spool Tool was an idea born out in the field. While watching a group of people work with paracord, I noticed the difficulties everyone was having with the paracord unraveling, getting tangled up, knotting, and generally becoming a big pain to handle. Then came the added problem of keeping your blade/scissors and lighter close at hand. Unexpectedly, the idea for a tool to manage it all was born…the Spool Tool.

Spool Tool Features:

• Can be Purchased with 100% Nylon, Type III, Commercial Paracord
• Lenox Standard Utility Blade (Replaceable): Shatter Proof, Titanium Nitrite Coated
• All Stainless Steel Hardware including Spare Nut and Screw
• 2 Paracord Attachment Points
• Holder for Mini-BIC Lighter
• 8 Burn Slots with Various Sizing to Accommodate Different Thickness of Cord
• Carabineer/Lanyard Hole
• American Made - Built and Designed for a Lifetime of Use

My first thought of the "Spool Tool" was, why didn't they have this when I was in the military? My second thought was, why didn't I think of this? The spool itself feels virtually indestructible and though simple in function, it is well thought out and designed.

The razor blade, though it will last a lot longer than the 50' of paracord will, was extremely simple to replace. Two screws that are attached to the spool via a small nut on the reverse side are all it takes to remove the cover and to reattach once the blade has been changed out.



From what I understand, the BIC lighter will not be included with the Spool Tool when shipping is required, though it may be included when it is offered for sale in stores. At a cost of around $1 and found for sale virtually everywhere you can pick up a pack of smokes, it is a moot point whether or not the lighter is included. And if you are worried that the lighter's "button" will be pressed while in your bag, don't fret, Tricorne has already thought of that and has included a tab that blocks any inadvertent attempts to lose all of your lighter fluid.



To use the Spool Tool, select your length of paracord that you need and cut with the razor blade:



Place the end of the paracord through one of the burn slots (multiple different sizes):



Burn the tip of the frayed paracord until you have a "bubble" of burnt material:



Pull the paracord through the burn slot and the "bubble" of burnt material will form to a finer point. (If you desire, I found that if there is excess dried hard material on the end of the paracord, it can be trimmed by using the razor blade with ease.):




Spool Tool's are currently available for purchase on their Facebook page. CLICK HERE

Spool Tool without Paracord: $18.99
Spool Tool with 50' of Paracord (Desert Tan, OD Green, or Black): $23.95

For Spool Tool's Webpage, Click HERE. (Note...the webpage is still in development)

[Computalotapus]

As I have mentioned to you before this is an awesome idea. I was introduced to paracord when I was in the military. Have used it ever since. As a father I showed it to my daughters who like making bracelets, key fobs, and what not.

Awhile back the wife and I decided to get a bunch of cord and donate a bunch of thin blue line bracelets to the local PD station as well as some support our troops ribbon bracelets to the local VA and VFW.

I work as a network administrator now and the wife does sales for the same company. While she was out visiting clients that happen to own a local wellness shop they inquired about her bracelet and asked if I would be willing to make a bunch of bracelets for them with the breast cancer awareness ribbon.

I love the idea of this spool tool and will be trying one out.


Sent from my iPhone using Tapatalk

[JohnnyRambo]

"Ecwid would like to access your public profile, friend list, email address and current city."

Heads up. If you try to purchase via the FB link this will pop up at checkout.

Hopefully they fix this and go with a shopping cart that does not invade privacy as I really want to buy one.

[zero7one]

"Ecwid would like to access your public profile, friend list, email address and current city."

Heads up. If you try to purchase via the FB link this will pop up at checkout.

Hopefully they fix this and go with a shopping cart that does not invade privacy as I really want to buy one.

I believe their webpage is up and running with a shopping cart.... http://www.spooltool.us

Sent from my GT-P5113 using Tapatalk 2

[Computalotapus]

Internal Server Error. Maybe I can help them out with that and they can hook a brother up


Sent from my iPhone using Tapatalk

[JohnnyRambo]

Confirmed website is now working. Just placed an order online. They accept paypal.

Brilliant product! Looking forward to getting it. Thanks for the update!

[Computalotapus]

Confirmed website is now working. Just placed an order online. They accept paypal.

Brilliant product! Looking forward to getting it. Thanks for the update!

Yep yep thanks. Placed order as well.

[zero7one]

Awesome guys...thanks for the updates.

[Essayons]

Bought five. Can't wait to T&E.