Results 61 to 75 of 82
-
28 April 2015, 17:00 #61
Thank you Sir. It is Sig factory FDE except for the mag release.
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
30 April 2015, 18:10 #62
I'm sure this isn't the right spot for this-- and mods please move it as needed.
But how do you remove the color fill on a stripped lower? Picked up a gen 1 Noveske that's immaculate except the horrendous color fill job.
Thanks guys
-
30 April 2015, 18:20 #63
-
30 April 2015, 18:47 #64
Hoppes and a plastic dental tool work pretty well.
-
1 May 2015, 01:24 #65
-
1 May 2015, 21:11 #66
This is correct advise.
Back when I was doing the "building a rifle for a friend" project, he provided me the lower, and it was covered in color fill. A little elbow grease and acetone got rid of the problem. Afterwards, I lubed the surfaces and it looked like new again.
-
1 May 2015, 21:53 #67
Got colors? Post up any AR15 that isn't just black.
To be 100% truthful, we really wanted to find a nice gen 1 combo set to start my wife's 12.5" SBR project. I must have looked for months with no luck. Then of course for 2-3 days Rainer had them while I was broke...
I literally found this one in a hole in the wall shop. I figured for 90$ it would be hard to lose on it! Haha
(Pic thread..)
Usual seekins stuff
IWC end plate
Noveske single safety & pins
Finally found a permeant home for the elf 3gun trigger
And we're thinking of using the BCM A5 KitLast edited by DutyUse; 1 May 2015 at 21:57.
-
2 May 2015, 10:50 #68Contributing Member
- Join Date
- Dec 2009
- Location
- NC
- Posts
- 129
- Downloads
- 3
- Uploads
- 0
-
8 May 2015, 07:54 #69LEO / MIL
- Join Date
- Feb 2008
- Posts
- 58
- Downloads
- 0
- Uploads
- 0
-
8 May 2015, 07:58 #70Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
-
8 May 2015, 08:01 #71LEO / MIL
- Join Date
- Feb 2008
- Posts
- 58
- Downloads
- 0
- Uploads
- 0
Rustoleum earth brown.
-
8 May 2015, 08:02 #72Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
Thanks, looks sweet.
-
8 May 2015, 08:02 #73LEO / MIL
- Join Date
- Feb 2008
- Posts
- 58
- Downloads
- 0
- Uploads
- 0
Thanks!
-
8 September 2015, 23:26 #74
-
23 September 2015, 01:20 #75