Results 1 to 12 of 12

Threaded View

  1. #1
    Join Date
    Jun 2007
    Posts
    5,596
    Downloads
    0
    Uploads
    0

    Guide to assorted Flash Suppressors

    Name:  IMG_7494 1028 WEVO.jpg
Views: 7992
Size:  83.0 KB



    Weapon System: AR15/ M16

    Manufacturer:

    Advanced Armament Corp

    Noveske Rifleworks

    Primary Weapon Systems

    Saylors Machine

    Yankee Hill Machine/ YHM

    Vltor



    Purpose of Item: The purpose of a flash suppressor on the AR15/ M16 platform is to reduce/ suppress the flash from the end of the barrel as the weapon is fired.


    Tools Needed: Open end wrench. If timing the Flash Suppressor is recommended, a second person may be used to hold and brace the weapon, or the use of a clamp or action block may be required.


    Items Included: Most Flash Suppressors will include some form of washer if one is needed. This may be a peel, or in most cases, a crush washer.


    *** NOTE- The below muzzle devices are one which are owned by myself, and most have been used, dropped, knocked into things, or left laying around. The colored markings observed on some are paint, grease, dirt and who knows what. These items don't come that way from the manufacturer, this is simply what I currently have on hand. ***
    Last edited by Stickman; 4 August 2008 at 10:52.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •