Results 1 to 6 of 6
Thread: First Look: Mega Arms AR15 MKM
-
17 September 2013, 21:19 #1
First Look: Mega Arms AR15 MKM
Here's a first look at the Mega Arms AR15 MKM. This is very similar to the 7.62 MKM and features the same mounting system with a 2 piece design. Weights are unknown, but it appears that they will release them in 14", 12", 9" and 7" MSRP's will be $485, $462, $431, and $400 respectively.
• The new Mega KeyMod AR15 MKM Billet T7075
• Compatible with all standard KeyMod accessories.
• Two piece, precision fit design.
• The strength and durability of a billet upper combined with a sturdy lightweight extruded hand-guard.
• Ultra lightweight design.
• Includes upper and hand-guard and comes with dust cover door installed, assembly screws, one 9 slot rail, barrel nut & wrench.
• Comes standard with laser engraved “T” numbers.
From our friend Stickman, who wrote this for Military Times:
Does the new Mega Arms 5.56 MKM look familiar? It certainly should, you can think of this as the little brother to the .308 Mega Arms MKM MA-TEN which is also a two piece upper receiver and handguard which when assembled resembles a monolithic upper receiver. The two piece assembly allows for lighter weight, interchangeable lengths, easier assembly, more precise machining, easier cleaning under the handguards, and replacement of rails in event of damage. This rail and receiver combo is aircraft aluminum and anodized a deep black. A quick glance lets us see this is a keymod rail system, and as with all keymod rails each accessory from other manufacturers will fit the slots.
-
17 September 2013, 22:44 #2
Even with the most cursory running of the numbers, this upper+rail combination is really tempting. GI Bill payments can't come soon enough.
"The first principle is that you must not fool yourself, and you are the easiest person to fool." - Richard Feynman
-
17 September 2013, 23:03 #3
Great now I need a matching lower thanks MEGA !!!!!!!!
-
18 September 2013, 03:37 #4
Cool!! I am liking this, so i wonder how long till these will be out? And what a real world price will be for them, i like the 14" length and need a rail to finish my build but this setup is intriguing.
So cause i dont know i am assuming this doesnt use a std barrel nut and uses one they supply with it?
-
18 September 2013, 15:46 #5
Judging by the instructions that MEGA Arms provides about barrel installation, the MKM uses the barrel nut that they provide with it.
Additionally, Mega recommends the use of the following low profile gas blocks:
Rainier Arms: Low profile match grade gas block
Stag: Low profile gas block
Vltor: GB-2S
Yankee Hill: YHM-9383"The first principle is that you must not fool yourself, and you are the easiest person to fool." - Richard Feynman
-
23 October 2013, 21:02 #6
These are now shipping to your favorite Mega Arms Dealer. Also currently in Stock at Rainier Arms here.