AR Accessory/Parts Photo Thread

[GOST]

I'm the direct opposite, the steeper angled grips don't work as well for me.

[SINNER]

I am just the opposite. I can not stand the steep angled grips. The B5's and Umbrella grips are horrible feeling to me.

[Dstrbdmedic167]

Grip 23 is the best grip out there IMO... It puts my hands exactly where it needs to be.

[SINNER]

LOL GOST beat me to it.

[Pyzik]

Hmm. Maybe it's because I started out with an AK. It's quite uncomfortable.
Gonna see if anyone locally wants to trade me for a K-grip locally or similar. Otherwise this one will end up in the "pay it forward" thread.

[BoilerUp]

I replaced my UCWRG Grip 23 with a BCM Gunfighter Mod 3. Very close in shape/angle but I much prefer the texture and contour. Also, the BCM gunfighters have the tab to close the gap between the grip and the trigger guard (fixed on the Mode 3 or modular/replaceable on the Mod 1 and Mod 2)



Here is the Grip 23 laying on top of the Gunfighter, line up as best I could:

[Pyzik]

I replaced my UCWRG Grip 23 with a BCM Gunfighter Mod 3. Very close in shape/angle but I much prefer the texture and contour. Also, the BCM gunfighters have the tab to close the gap between the grip and the trigger guard (fixed on the Mode 3 or modular/replaceable on the Mod 1 and Mod 2)



Here is the Grip 23 laying on top of the Gunfighter, line up as best I could:

I need to try the Mod 3. I had the Mod 1 and found it to be too thin.

[BoilerUp]

I need to try the Mod 3. I had the Mod 1 and found it to be too thin.

Mod 1 and Mod 3 dimensions are the same, it's just that the mod 3 is one piece (doesn't have the interchangeable piece to cover the gap with the trigger guard) and therefore cheaper. The Mod 0 has an even shorter LOP as it doesn't have the beaver tail.

[Pyzik]

Mod 1 and Mod 3 dimensions are the same, it's just that the mod 3 is one piece (doesn't have the interchangeable piece to cover the gap with the trigger guard) and therefore cheaper. The Mod 0 has an even shorter LOP as it doesn't have the beaver tail.

Hmm. One mod is fatter than the rest (width, not from back to front).

[GOST]

From BCM:

Mod 3 Description
Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.

[Pyzik]

From BCM:

Mod 3 Description
Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.

I thought so.

Pic thread.

BAD INC by David Pyzik, on Flickr

[Dstrbdmedic167]

[BoilerUp]

From BCM:

Mod 3 Description
Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.

I stand corrected. I mic'd them and now see that the Mod 0 is in fact skinnier near the trigger and thickens as you move down the pistol grip towards the compartment door. The lower 1/3 of the grips are about the same, so you'll notice a slightly thinner profile near the "top" of the grip.



It's not much and frankly I never noticed that as much as the extra length (from backstrap to trigger) that you get with the Mod 3.



I have good size hands and love the mod 3 and but find the Mod 0 a little small for my tastes but it is on a build that is intended mostly for female and youth shooters.

[Munition]

[mustangfreek]

Very nice!