Results 1 to 5 of 5
Thread: Accuracy test of WMD barrel
-
22 June 2014, 14:25 #1Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
Accuracy test of WMD barrel
Disclaimers:
1. This is the first time I have ever shot one of my ARs past 50 yards
2. This is the first time I have used a magnified optic
3. This is the first time I have shot this rifle.
Important rifle specs:
1. WMD barrel. Midlength 16" govt profile 1:8 twist
2. CMMG Mil spec FCG
3. Rifle length buffer assembly
4. Bushnell AR Optics 3-12 scope
Rifle in question:
Here is my best group at 100 yards. Just over a 1" 3 round cheater group. I shot on a rest. I used Hornaday 5.56 match 75gr ammo.
I think with a better 2 stage trigger, a bipod, a lot more practice, and a lot more patience, I will be able to get this barrel to shoot sub MOA. I sighted it in with 62 gr mil spec and I was getting better and better groups the more I shot.
Here is the target I was using to sight in with Mil-Spec 62gr ammo. The first high shot was the first shot before I made adjustments. After my final adjustments I was pretty much within the 2" circle with Mil Spec ammo. The second target was also shot with Mil-Spec ammo and I had a few fliers.
On all my other groups with the match ammo, I had a flier which makes the groups really bad. This, again, is due to my lack of experience. I have a strong feeling that with a lot more practice with this setup, I will do much better. There are also plans for a better trigger and a bipod for this setup.Last edited by rxer311; 22 June 2014 at 17:19.
-
22 June 2014, 20:04 #2
One more piece of advice if I may:
With a fixed stock, you may want to consider going back to more of an angled grip. I've noticed It's more of a straight draw on the trigger vs. my finger being forced to travel in an arc with a more vertical grip. This was causing me to jerk the trigger and pull shots rather than being surprised by the round going off. YMMV. All in all it's a fine looking rig, and a goods day of practice.It's difficult to soar with eagles, when you work with turkeys...
-
22 June 2014, 20:41 #3Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
You may have a valid point there. I was pulling a lot of shots. As you can see most of my shots were on target but I had a lot of fliers. I knew as soon as I let a shot go that I would have a flier. This is why I only got one decent group. I am going to have to pick up Magpul MOE and give it a try.
-
22 June 2014, 21:47 #4
Is this a WMD barrel you had coated or a barrel they were selling? I'm wondering who makes their barrels.
-
23 June 2014, 04:28 #5Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0