Transfer Times

**Sak007** · 4 March 2016, 06:52

All the lowers I want are out of stock

I hope this goes through so I can sbr the matching lower to my lefty CMT set up that got denied the last go round .
I have all my forms filled out and saved on e-file so I can just run my card the second it's official.

**UWone77** · 4 March 2016, 10:26

Originally Posted by mustangfreek

I read that last nite also, something like 96-4

It is, now senate/inslee looks like it might happen before 41p, if so I'm selling a kidney or something...lol

I doubt the changes will go into effect before 41P does. In your case, 41P may work better for you. You don't have to buy a trust, and you can file as an individual. $10 for 2 fingerprint cards, 4 passport photos from Costco at $5 is much cheaper for the Ginger.

**SINNER** · 4 March 2016, 10:47

Times are certainly getting longer on all types.

A purchase I made in November took 4 weeks to be transferred to my dealer. One I purchased the first week of January just got completed this week.

**SwissyJim** · 4 March 2016, 12:40

Battle Kitty lower submitted for SBR

Submitted eForm: 3/4/16

**UWone77** · 4 March 2016, 12:47

Originally Posted by SwissyJim

Battle Kitty lower submitted for SBR

Submitted eForm: 3/4/16

You dirty dingo!!

**SwissyJim** · 4 March 2016, 13:10

Originally Posted by UWone77

You dirty dingo!!

Just need to decide on a stock... thinking UBR, to hold up to the 458Socom. Upper matches 'ok' to the lower so will be an easy fast build since upper is already running.
But I have probably 4 months to decide on the stock

(or find someone to swap FDE and black parts for the 2-tone look)

**Jerry R** · 4 March 2016, 13:20

Form-3 on an SBR submitted 2/16 - SOT said his current times on a Form-3 Transfer was running 37 to 41 days, then we Form-4 it. Four items in the pipe now, the factory SBR, two Form-1 SBR's and the 762-SD can.

Jim, one of the Form-1 SBR's is my Battle Kitty - just couldn't resist. They're both back from Ident Marking.

**Deadwing** · 4 March 2016, 20:09

Originally Posted by mustangfreek

It is, now senate/inslee looks like it might happen before 41p, if so I'm selling a kidney or something...lol

Man, i hope you're right about it happening before the new atf regs take effect.

**SwissyJim** · 4 March 2016, 20:21

Originally Posted by Jerry R

Form-3 on an SBR submitted 2/16 - SOT said his current times on a Form-3 Transfer was running 37 to 41 days, then we Form-4 it. Four items in the pipe now, the factory SBR, two Form-1 SBR's and the 762-SD can.

Jim, one of the Form-1 SBR's is my Battle Kitty - just couldn't resist. They're both back from Ident Marking.

Nice! I need to contact Ident before I send mine in... want to see if the under trigger guard is still an option with the billet lowers. LOVE that option... but if not on the guard itself will suffice

**DutyUse** · 4 March 2016, 20:30

I need to send in 3 of my lowers to be laser engraved for trust. Considering Ident or CMT

**Deadwing** · 4 March 2016, 20:34

Originally Posted by SwissyJim

Nice! I need to contact Ident before I send mine in... want to see if the under trigger guard is still an option with the billet lowers. LOVE that option... but if not on the guard itself will suffice

Something tells me under the trigger guard will be a no-go with a billet lower, as i had to swing the trigger guard out of the way (or remove it completely) when i had my forged lowers engraved in that spot. I could be wrong though. They could probably do the bottom of the trigger guard no sweat, though. I've also seen the engraving done on the inside of the magwell bevel. That might be an option for you if unobtrusive is the goal.

**SwissyJim** · 4 March 2016, 21:06

I figure under the trigger is iffy at best, but worth it to try anyways. They do state on the order form that on the bottom of the guard is an option on SOME billet lowers. But I had not thought of the magwell flare... I'll ask when they contact me back. Thanks for the idea!

**Deadwing** · 4 March 2016, 21:12

Originally Posted by SwissyJim

I figure under the trigger is iffy at best, but worth it to try anyways. They do state on the order form that on the bottom of the guard is an option on SOME billet lowers. But I had not thought of the magwell flare... I'll ask when they contact me back. Thanks for the idea!

No problemo. I'm curious to hear what they'll be able to do.

**mustangfreek** · 5 March 2016, 01:41

My envy is strong in this thread..you Guys and all the good toys...

**Jerry R** · 5 March 2016, 06:14

Originally Posted by SwissyJim

but if not on the guard itself will suffice

I thought about that and should have asked, but since the guard is split, I figured it wouldn't work. Let us know what they can do. If they can do the trigger guard, I will

Thread: Transfer Times

Thread Tools

Display

Posting Permissions