Results 631 to 645 of 1391
Thread: Transfer Times
-
4 March 2016, 06:52 #631
All the lowers I want are out of stock
I hope this goes through so I can sbr the matching lower to my lefty CMT set up that got denied the last go round .
I have all my forms filled out and saved on e-file so I can just run my card the second it's official.
-
4 March 2016, 10:26 #632
-
4 March 2016, 10:47 #633
Times are certainly getting longer on all types.
A purchase I made in November took 4 weeks to be transferred to my dealer. One I purchased the first week of January just got completed this week.
-
4 March 2016, 12:40 #634
Battle Kitty lower submitted for SBR
Submitted eForm: 3/4/16-----------------------------------------------
Jim
"You can never have too many guns" - my wife's actual comment
Alaska Fun
-
4 March 2016, 12:47 #635
-
4 March 2016, 13:10 #636
Just need to decide on a stock... thinking UBR, to hold up to the 458Socom. Upper matches 'ok' to the lower so will be an easy fast build since upper is already running.
But I have probably 4 months to decide on the stock (or find someone to swap FDE and black parts for the 2-tone look)-----------------------------------------------
Jim
"You can never have too many guns" - my wife's actual comment
Alaska Fun
-
4 March 2016, 13:20 #637
Form-3 on an SBR submitted 2/16 - SOT said his current times on a Form-3 Transfer was running 37 to 41 days, then we Form-4 it. Four items in the pipe now, the factory SBR, two Form-1 SBR's and the 762-SD can.
Jim, one of the Form-1 SBR's is my Battle Kitty - just couldn't resist. They're both back from Ident Marking.
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
4 March 2016, 20:09 #638
-
4 March 2016, 20:21 #639
Last edited by SwissyJim; 4 March 2016 at 20:28.
-----------------------------------------------
Jim
"You can never have too many guns" - my wife's actual comment
Alaska Fun
-
4 March 2016, 20:30 #640
I need to send in 3 of my lowers to be laser engraved for trust. Considering Ident or CMT
-
4 March 2016, 20:34 #641
Something tells me under the trigger guard will be a no-go with a billet lower, as i had to swing the trigger guard out of the way (or remove it completely) when i had my forged lowers engraved in that spot. I could be wrong though. They could probably do the bottom of the trigger guard no sweat, though. I've also seen the engraving done on the inside of the magwell bevel. That might be an option for you if unobtrusive is the goal.
"It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ
-
4 March 2016, 21:06 #642
I figure under the trigger is iffy at best, but worth it to try anyways. They do state on the order form that on the bottom of the guard is an option on SOME billet lowers. But I had not thought of the magwell flare... I'll ask when they contact me back. Thanks for the idea!
-----------------------------------------------
Jim
"You can never have too many guns" - my wife's actual comment
Alaska Fun
-
4 March 2016, 21:12 #643
-
5 March 2016, 01:41 #644
My envy is strong in this thread..you Guys and all the good toys...
-
5 March 2016, 06:14 #645NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"