11.5" Carbine Barrels

[mustangfreek]

Arnold Schwartzenegger could.

Lol...

[GOST]

Sorry Brother! I can't shoot it with bare barrel and no handguards.

I believe you can, you're just being modest.

[UWone77]

I believe you can, you're just being modest.

I'll go shoot it this weekend. Just realized I also need a rear backup sight! It's starting to nickel and dime!

[GOST]

The write up on your thoughts on the new upper will be expected by no later than 0700 in 9/8/14.

[Computalotapus]

When you go can you take a pistol lower with you as well and let me know how that works :)

[UWone77]

When you go can you take a pistol lower with you as well and let me know how that works :)

What pistol lowers? The disassembled ones?

[Computalotapus]

What pistol lowers? The disassembled ones?

Make it happen I know you have it in you.

[GOST]

It's good that we have motivational speakers like Computalotapus.

[GOST]

Wanting to try the barrel out of one of these in my new build.

http://www.bravocompanyusa.com/BCM-1...elwf-kmr10.htm

[KevinBLC]

I really really wish I could venture into a SBR upper.

[Hmac]

I really really wish I could venture into a SBR upper.

Why can't you?

[rob_s]

Wanting to try the barrel out of one of these in my new build.

http://www.bravocompanyusa.com/BCM-1...elwf-kmr10.htm

I was really close to buying one of those, then the 14.5"/13.0, then the 16"/15.0 (which isn't out yet, I don't think)... then I realized I had a Colt 6933 upper sitting around pretty much stock and pretty much unfired, and the lower it came on, and kind of wound up building a similar upper around that. obviously the barrel on mine is just a standard 0.625" OD, 11.5" barrel, but I got the 10.0, the BCM comp, the BCM keymod VFG, BCM's new flip sights... now I just need to go brave the public range on public day and get it zeroed.

If all goes well, I may also skip the 16" version and turn my 6520 flattop Colt into a matching example. Would be funny to come 'round after all this time to having two matched guns again, one 11.5" and one 16", but with all the "new hotness".

[Iraqgunz]

We have several law enforcement agencies and civilians using the Melonite barrels. The accuracy has been outstanding as well. An LE agency in GA shot a 1 MOA group with our 11.5" with a Leupold scope and their duty round. Across the board our chrome lined and Melonite barrels shoot very good. They are all 4150CMV, proper gas ports sizes, correct 5.56 chambers, etc...

Anybody have experience with the Sionics 11.5 ?
http://sionicsweaponsystems.com/stor...id_category=10

[UWone77]

We have several law enforcement agencies and civilians using the Melonite barrels. The accuracy has been outstanding as well. An LE agency in GA shot a 1 MOA group with our 11.5" with a Leupold scope and their duty round. Across the board our chrome lined and Melonite barrels shoot very good. They are all 4150CMV, proper gas ports sizes, correct 5.56 chambers, etc...

I'm a big fan of SIONICS products. My next SBR upper will be built around a 11.5" Barrel. Gunz, I need the industry price.

Anyhow, GOST, I didn't have much range time to dedicate to shoot the 11.5" BCM. Only got 210 rounds down range on Monday with it. I was mainly shooting the 10.3" DD Barrel. Anyhow, the 11.5" is a smooth shooter, but hard to say if it's any smoother than a 10.3-10.5" The BCM upper did remind me of the fact there is nothing wrong with using a $5 A2 FH.

[Ride4frnt]

Wish sionics made a 10.5". Not sure I want a 11.5" on the pistol build.