Results 31 to 45 of 56
-
22 October 2014, 14:29 #31
-
30 October 2014, 09:38 #32
Mixing H335 with good 69 or 77 gr bullets should be illegal. That stuff is nasty blaster ball powder. I only use it when I want to load high flash loads for night shoots with my SBR. I'd never run that crap in a nice barrel.
For a lights out Target load, H322 (21.6-21.8 gr), a 77 gr OTM, and Wolf/Tula primers can't be beat.
For a hot load that's almost as accurate, XBR (23.4 gr), a 77 gr OTM, and WOLF/Tula primers is solid.
The mild russian primers are all the difference in the world in squeezing that last bit of accuracy out, and trimming those SDs down to single or low double digits.
-
30 October 2014, 10:33 #33
-
31 October 2014, 07:02 #34
It's that they're mild. German Salazar wrote an article relating to 308 palma if I remember correctly.... but the essence of the article was.... for precision/competition ammo, you want the mildest primer you can get that won't sacrifice reliable ignition.
We've seen this in Magnum bolt gun loads too. Our best shooting loads run with regular LR primers instead of LR Magnum primers.
One small rifle primer test we did showed BR-4s as the worst grouping. Now that's specific to that load only. But the WOLF SRMs work the best. The one downside to the Russian primers is they don't work good with H335 ball powder. But that powder is nasty anyway, so I just don't shoot it. Or if I find a pound, I'll run CCI primers with it.
-
31 October 2014, 15:20 #35
Thanks for the info. Like you said, I think it's likely load/rifle/powder/etc dependent. I use BR4s in my .223 match ammo (someone gave me 2000 otherwise I wouldn't pay the extra amount for them and will go back to regular primers when those are used up) and get some seriously awesome groups with reloader 10 X and 4198 powder. In 308 I just use regular primers.
-
3 November 2014, 05:54 #36
Man... I was in Cabelas a month back, and they wanted like $59 per thousand for BR-4s compared to their regular CCI primers at $39 per thousand.
-
3 November 2014, 18:19 #37
-
4 November 2014, 05:38 #38
No doubt about it. For extruded powders, the TULA or WOLF run the smallest Standard Deviations anyway.
-
11 November 2014, 07:47 #39
My buddy let some guy shoot my loads in his accurized AR. I guess due to the terrain it was just under a full 100 yards shooting 5 round groups with 80 SMKs on the left, and 77s on the right.
-
15 January 2015, 19:21 #40
The best budget accuracy bullet in my mind is the Hornady 55gr SP w/c. They sell for the exact same price as a FMJ bullet and sometimes even cheaper when comparing to other brands. Using IMR 4064 and Wolf SRM primers my PSA mid-length barrel shoots these just over MOA and my 20" Green Mountain A2 will put them right at MOA. I'm currently buying these from Midsouth, who sell them packaged under their Varmint Nightmare store brand, for $8 per hundred. Exact same bullet as the Hornady though. Each round costs me about 19 cents.
For a bullet that shoots well and expands, it's about double the price to step up to something more accurate.
From my PSA with a button rifled FN barrel
-
16 January 2015, 13:35 #41
Guys, I have a $25 gift card to use at bass pro. Usually I would use this on fishing tackle, but God knows I have thousands of dollars of it that doesn't get used already. I think I'm gonna pick up some heavy bullets for my 18" gun. They have hornady 68's and 75's. Which do you think would be a better start for my 18" BHW 1:8 twist polygonal rifled barrel, since I don't have the money for both up front? I think I'll try 68's first but want an expert opinion on this
-
16 January 2015, 14:21 #42
68gr hornady's shot very well out of my RA match barrel, give em a try
-
16 January 2015, 17:17 #43
Just make sure to buy thr 75gr BTHP and not the 75gr Amax. The Amax isn't meant to be loaded to magazine lengths.
-
16 January 2015, 17:28 #44
-
16 January 2015, 18:06 #45
Reloaders whats your favorite plinking/ accuracy load?