Results 1 to 6 of 6
  1. #1
    Join Date
    Sep 2013
    Posts
    20
    Downloads
    0
    Uploads
    0

    Lightweight Barrel "Test"

    I've often heard and read that lightweight barrels on AR-15's weren't as consistent as their heavier counterparts when it comes to accuracy especially after they heated up. I recently purchased one of Rainier Arms RUC rifles with a 16" lightweight barrel. I called Rainier prior to placing my order and they told me that Daniel Defense manufactured the barrels on that particular gun. I used to own a complete Daniel Defense gun and was pleased with it. I own several AR's, but this rifle had many features that were a first for me. The rifle is my first mid-length, first with anything other than an A2 flash hider, and my first with a light weight barrel.

    When I received the rifle I was thoroughly impressed by the weight and handiness of the rifle. After I shot it I was even more impressed. I feel like I've been missing out on my other rifles with gov.'t and heavier profiles. I showed the rifle to several of my co-workers, they were impressed with the fit and finish and overall feel of the rifle, but some had their doubts as to the lightweight barrel. The video below was mainly to satisfy my curiosity, but I thought a couple of other people might be interested as well so I filmed it. I knew setting out that I'm unfortunately not a good photographer, I found out I"m a worse videographer. Hopefully it conveys the point well enough.

    For the "test" I ran 100 rounds through the rifle. I shot an initial 10 shot group at 50 yards to establish a baseline for the zero and then ran 80 rounds through the gun on a select fire lower. Immediately after shooting the 80 rounds I shot another 10 shot group at 50 yards on the same initial target to see if the group opened up and if there was a shift in zero. I figured 100 rounds was enough to heat the gun up sufficiently without being a colossal waste of ammo. All of the ammo was Federal Tactical 55 gr. soft point --223 not 556.

    http://youtu.be/w9fmsilDEXo

    The second 10 round group may have showed a very slight shift down, but overall I'm happy with how well it maintained its accuracy. I can't see a lightweight barrel being any detriment in any realistic scenarios.

    I've only had time to run a few hundred rounds through the rifle, but based on its handling characteristics and consistency I see more lightweight barrels in my future.

  2. #2
    Join Date
    Apr 2012
    Location
    N. KY
    Posts
    3,055
    Downloads
    1
    Uploads
    0
    What are you calling light weight? Reason I ask is I have two BCM uppers with "light weight" barrels, that are much larger than my Voodoo Arms "ultra light" barrel that weighs approx. 1lb. 3oz. I haven't finished that rifle, so I have no idea how it will react when heated up.

    FT
    NRA Life Member
    Deplorables Life Member
    Bible and Gun Clinger
    Filthy Stinking Wal Mart Shopper


  3. #3
    Join Date
    Sep 2010
    Location
    PNW
    Posts
    15,286
    Downloads
    0
    Uploads
    0
    Are these .625 at the gas block LW barrels?

  4. #4
    Join Date
    Apr 2012
    Location
    N. KY
    Posts
    3,055
    Downloads
    1
    Uploads
    0
    Quote Originally Posted by UWone77 View Post
    Are these .625 at the gas block LW barrels?
    Not sure which one of us you're asking, UW, but the Voodoo barrel is.

    FT
    NRA Life Member
    Deplorables Life Member
    Bible and Gun Clinger
    Filthy Stinking Wal Mart Shopper


  5. #5
    Join Date
    Sep 2013
    Posts
    20
    Downloads
    0
    Uploads
    0
    The barrel is .750 at the gas block. .575 1" from the end of the muzzle. .660 1 " from the end of the chamber. Barrel is marked: RA CHF 5.56 NATO 1:7 MP

  6. #6
    Join Date
    Sep 2014
    Location
    Kentucky
    Posts
    2,277
    Downloads
    11
    Uploads
    0
    Great video

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •