Results 1 to 14 of 14
-
8 May 2014, 11:33 #1
My Newest Build (BCM, PSA, Hipertouch, etc)
The other day I was doing some cleaning up around the house when I suddenly realized I had quite a few parts laying around with which to build a new AR. So I did. Specs on it are as follows:
1. Palmetto State Armory - Upper and lower receiver, bolt, extension tube, LPK minus fire controls
2. JP Enterprises Lightweight BCG
3. Hipertouch 24C Trigger with 2.7# springs installed
4. Bravo Company Gunfighter Mod 2 Grip
5. Bravo Company KMR13 Keymod Rail System
6. Magpul STR Stock and ASAP Endplate
7. Rainier Arms MEDCON 16" Stainless Barrel, 1/8 twist and polygonal 5R Rifling
8. Rainier Arms Raptor Ambidextrous Charging Handle
9. Kies Adjustable Lo-Pro Gas Block
10. Ares Armour Effin-A MKII Adjustable Comp
When you can't be safe, be dangerous.
-
8 May 2014, 12:52 #2
Nice looking build. Not familiar with that trigger.
-
8 May 2014, 13:07 #3
-
8 May 2014, 13:24 #4
-
8 May 2014, 13:27 #5
I like the Hipertouch triggers. They work well during the time I used one. Adjustable as they come with 3 different spring strengths that you can swap out yourself.
I'd still put them a hair under Geissele though.
-
8 May 2014, 14:45 #6
Looks mighty fine for having spare parts laying around. Wish I was in that situation.
-
8 May 2014, 14:51 #7
I was still short a barrel, rail, and trigger, but having everything else gave me a good excuse to buy the rest and put it together.
When you can't be safe, be dangerous.
-
8 May 2014, 14:53 #8
-
8 May 2014, 14:55 #9
My Newest Build (BCM, PSA, Hipertouch, etc)
Yeah...I have a spare safety selector and a milspec grip. And I think a set of kns pins.
Then again, I'm not allowed by law to build anymore rifles. So I don't need any spare parts until I build me a matching 6.8 upper for my new rifle for deer.
-
8 May 2014, 20:18 #10
-
8 May 2014, 20:37 #11
Live in maryland brother. No longer allowed to build rifles. Can only buy rifles off the shelf if they are HBAR. Can't buy stripped lowers anymore. I can build uppers, just can't build anymore lowers.
The only loophole is that I can buy a 9mm lower (mag well permanently altered to not accept standard mags) or .308 lowers.
Know what really grinds me gears? I won the San Tan lower last night in the giveaway... Can't have it. Thankfully UWone77 is gonna work with me on something I can actually own.
-
8 May 2014, 22:18 #12
Jesus, what a pain in the ass. Sorry to hear that man.
When you can't be safe, be dangerous.
-
8 May 2014, 22:37 #13
-
9 May 2014, 02:21 #14
Nice build..
Ya ..someday id like to try a geisselle trigger....