Centurion Arms 9.5 and 11" CMR Rails

[UWone77]

Centurion Arms is releasing their popular CMR Rail in 2 additional lengths, the 9.5 and 11" to add to their existing 12 and 14" versions. They should be just a few weeks out and I believe Rainier Arms will have the first batch.

We'll release full specs and additional pictures as they come available. Until then, these "feature" sheets will have to do. Checkout Centurion Arms' new redesigned website here for more information.

[GOST]

That 9.5" will look sweet with a 10.2" Noveske 300.

[UWone77]

In case anyone is wondering, a Noveske KX5 will not fit inside of a CMR rail, other than the part that is flat for the wrench.

[Computalotapus]

In case anyone is wondering, a Noveske KX5 will not fit inside of a CMR rail, other than the part that is flat for the wrench.

you know what rail it will fit under... a Odin Works KMod rail... just saying you can send that KX5 to me if you are not going to use it haha

[UWone77]

you know what rail it will fit under... a Odin Works KMod rail... just saying you can send that KX5 to me if you are not going to use it haha

Well, I can't give mine away, Sheri gave me an unmarked one without any logos. Not sure they want those escaping into the wild.

I did get an 11" and 9.5" CMR, but now they don't fit with the KX5, I'm wondering how I should build them up.

[RiverRat]

I did get an 11" and 9.5" CMR.... I'm wondering how I should build them up.

Here's step 1 for the 9.5"

Noveske 10.2" 300 Blackout with block and headspaced bolt


If you're worried about ensuring clearance for a can, you could stretch the barrel about a quarter of an inch with the Rainier 10.5" barrels.

[GOST]

In case anyone is wondering, a Noveske KX5 will not fit inside of a CMR rail, other than the part that is flat for the wrench.

And some lo-pro gas blocks also.

[Chainring]

Odinworks 10.5 and CMR 9.5. Hubba-hubba.

[UWone77]

Here's step 1 for the 9.5"

Noveske 10.2" 300 Blackout with block and headspaced bolt


If you're worried about ensuring clearance for a can, you could stretch the barrel about a quarter of an inch with the Rainier 10.5" barrels.

Eventually I'd like a 10.2" but I already have a Noveske 8.2" in 300... I'd like to actually pair this up with an AAC Ranger 3.

[UWone77]

[UWone77]

The 11 and 9.5" are now live at Rainier Arms, who as expected got the first batch. The introductory price on them is $246 and $235 respectively.

Check the link here: https://www.rainierarms.com/?page=sh...roduct_id=4522 and https://www.rainierarms.com/?page=sh...roduct_id=4522

[Calengor]

I really wish someone had a pic of a 9.5" CMR on a 10.5" barrel

[UWone77]

I really wish someone had a pic of a 9.5" CMR on a 10.5" barrel

I think I might be able to mock that up for you later tonight,

[Calengor]

That'd be great! I'm thinking an 11" CMR is too long for an 11.5" barrel, but the 9 should work beautifully on a 10.5" barrel. I like my Centurion MK18, but I think I may prefer a 10.5" with a slimmer handguard than the DD RIS.

[UWone77]

That'd be great! I'm thinking an 11" CMR is too long for an 11.5" barrel, but the 9 should work beautifully on a 10.5" barrel. I like my Centurion MK18, but I think I may prefer a 10.5" with a slimmer handguard than the DD RIS.

Turns out I gave away my last 10.5" barrel, so I had to use a DD 10.3" Sorry, the closest thing I had. I think if you had say an AAC 51T mount, your can would ride up almost flush to the rail if that's the look you're going for.

This is just a mock up....