Results 1 to 5 of 5
Thread: Midwest PX Gen2 Billet Lower
-
9 July 2014, 12:13 #1
Midwest PX Gen2 Billet Lower
Midwest PX has a new line of lower receivers for the Gen 2 Line. If you're familiar with their Gen 1 receivers, they looked very similar to some other receivers on the market. For the Gen 2 line, the lower has been redesigned and recut for a more aesthetically pleasing appeal. I've been a Midwest PX fan since I've been using their Bolt Carrier Groups. Checkout Midwest PX here for more information and ordering
Description:
The PX15 billet lower is a phenomenal way to start your next build! Our premium billet receiver is manufactured for us by a contract machine shop in the US. All operations are performed under one roof to ensure a quality product prior to being sent out for milspec plating. These receiver are made of 7075 billet aluminum which is significantly stronger than 6061. We have a number of extras and upgrades built into this lower such as the threaded bolt catch pin, threaded takedown detent hole, and upper/lower tensioning screw. All hardware to take advantage of these features are provided with each lower at no additional charge. We also opted for a subdued rollmark for a cleaner, more aesthetically-pleasing look.
Specifications:
*Manufactured from a solid billet aircraft-grade 7075-T6 aluminum
*Matches forged uppers
*Broached magazine well with drop free design and beveled bottom lip
*Flared magazine well to assist in faster/easier reloads
*CNC deep rotary engraved to exceed ATF depth requirements
*MIL-A-8625 Type III Hard Anodizing (Deep Black)
*Captured take down pin spring/detent (includes hardware, Rear takedown pin spring may need to be trimmed 1/8-1/4" if set screw is used to give proper tension on pin)
*Upper/lower tensioning screw (includes hardware)
*Threaded bolt catch pin hole (includes hardware)
*Integrated enhanced trigger guard
*Low Shelf design to make full auto conversions for LE, MIL or post sample machine guns easier (RDIAS/RLL)
*Continuous threading through receiver extension hole and pistol grip screw hole
*Compatible with all lower parts kits, milspec and commercial receiver extensions, and most aftermarket parts.
*The Tactical Link AR-15 Enhanced Battery Assist Lever WILL work with the PX-15
* Magpul BAD lever will function properly on the Gen2 PX-15
MSRP: $99.95
-
9 July 2014, 12:16 #2
Oh and while browsing around their website, it appears you can get a combo deal involving this above mentioned Gen2 Receiver.
Gen2 Receiver
Lower Parts Kit
ALG Defense ACT Trigger
Milspec Receiver extension or A2 Extension Kit
All for $199
Looks like for those in CA, they can ship there as they are registered with CA-DOJ
-
17 July 2014, 13:31 #3
-
20 July 2014, 18:47 #4
-
7 August 2014, 07:05 #5