Results 1 to 15 of 37
-
17 July 2014, 20:19 #1
Sneak Peek: Rainier Arms Forged A-DAC Lowers
Rainier Arms is going to release some new Forged Lowers in the next week or two. These lowers will be similar to the original Forged Lowers, and will keep the 45 degree selector feature. However, they are going to add the ability to allow the bolt to be locked to the rear by pressing in on the magazine release button and pulling the charging handle to the rear. Does this feature sound familiar? It should, if you're familiar with the AXTS A-DAC Lower, which has the same feature. Rainier Arms has licensed this in their new Forged Lower.
Prices will be slightly higher for this version, but unknown at this time. This will be updated once I get more information.
The original Forged lower will still be available, if you don't want or need this feature. The Mountain logo has also been added. Here are a quick couple of snap shots I took with my iPhone so please forgive the quality.
-
18 July 2014, 04:15 #2
I need one of these, will fit right in with my other RA parts for my pistol build, plus i dont have a RA lower yet....
-
18 July 2014, 04:27 #3
-
18 July 2014, 20:55 #4
-
18 July 2014, 21:43 #5
Awesome!
Triple Bravo
http://www.flickr.com/photos/triplebravo/
-
19 July 2014, 02:58 #6
Hey UW, since you have seen them , do they have the tensioning screw like the other RA lowers? What about the mountain symbol on the front of the magwell, still there , removed or something else?
-
19 July 2014, 16:45 #7
-
19 July 2014, 16:54 #8
-
19 July 2014, 18:49 #9
-
19 July 2014, 20:37 #10
In case anyone is not familiar with the A-DAC and how it works. Here's a video that explains it:
-
20 July 2014, 18:48 #11
-
20 July 2014, 20:00 #12
-
22 July 2014, 12:53 #13
Sign me up. I've been pining for one of these for years. The fact that Rainer backs it makes it that much better.
-Mitch-
-
24 July 2014, 20:50 #14
-
25 July 2014, 01:01 #15