Results 91 to 105 of 113
Thread: Rainier Arms Photo Gallery
-
12 September 2017, 08:52 #91Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
12 September 2017, 10:09 #92
Thanks!
There's no "Team" in F**K YOU!
-
21 September 2017, 08:13 #93
SPR by Damage Photos, on FlickrGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
22 September 2017, 18:06 #94
Drool.... That thing is killer
To keep it going , have been shooting the pistol lately.. just cleaned it..so quick pic..bunch of rainier stuff barrel, pinned gas block, there older phosphate bcg, and most stuff from RA... Need/want to update it with a different rail,light and red dot..anyways...Last edited by mustangfreek; 26 November 2020 at 16:05.
-
23 September 2017, 10:50 #95NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
23 September 2017, 10:59 #96Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
24 September 2017, 13:05 #97
James had me itching for it; the BAD-CASS is not quite drop in with Geissele and other aftermarket triggers but I got it to work no problem! Super slick looking and solid function.
-
24 September 2017, 13:14 #98
I just swapped a bad Cass out yesterday. Forgot I had one.
Sent from my iPhone using Tapatalk
-
26 September 2017, 02:44 #99
-
21 October 2017, 16:47 #100
Built a 16” Ultramatch rifle for my buddy today; Mod 3 billet upper and lower, 16” polished/fluted Ultramatch Mod 2 barrel (intermediate gas w/ Rainier adjustable gas block), Raptor CH, Rainier Match/enhanced nitride BCG, Fortis 14” rail and Leupold 1-4x20 VX-R Patrol scope
I’ll post more pics later but it’s sharp!! And super light. My buddy will be mounting a SpecWar can on it and the gas block was super easy to adjust
-
21 October 2017, 17:11 #101
-
21 October 2017, 19:12 #102
-
21 October 2017, 19:13 #103
The newest Mod2 barrels are marked opposite the Rainier logo on the bottom:
-
22 October 2017, 18:21 #104
I'm glad they did this. I've asked them to mark what kind of barrels at least on the actual barrel itself, instead of at the base near the extension. Once you install it you have no idea whether it was a Match, UltraMatch, Rock Creek Match, ect. If you really wanted to know you'd have to take it apart and look for either the "M" or "S" markings. Maybe not a big deal to some, but if you have a few dozen RA barrels, or decide to sell yours down the road, it helps to have markings.
-
23 October 2017, 07:39 #105
That should be mandatory on all barrels. I have so many different calibers I forget what's what. Trying to look through vents, keymod slots and the like gets to be a real pain in the ass.