Results 1,126 to 1,140 of 1202
Thread: New Sponsor: Arisaka Defense
-
25 May 2019, 11:31 #1126
-
27 May 2019, 20:21 #1127
-
28 May 2019, 18:23 #1128
Changed it up a little and just ordered the 300 series body and the SR07 with the DS tail cap. No extra parts this way and cheaper too. Ok light gurus, which Malkoff head should I get? E1 scout M300 or the E1T scout M300?
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
30 May 2019, 05:52 #1129
Gene has a new head called the E1 Hyper. The light is apparently meant for maximum throw. It might be worth a gander.
https://malkoffdevices.com/collectio...00-1cr123-head
Sent from my SM-G930P using Tapatalk
-
1 June 2019, 15:01 #1130
Thanks, I got the email as soon as they dropped last week and ordered it. In fact I just pulled it from the mailbox a few minutes ago...
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
1 June 2019, 15:35 #1131
-
1 June 2019, 22:00 #1132
I picked up a 300 body from Will but missed the part that said it doesnt come with the mounting screws. Anybody know what size these are?
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
2 June 2019, 04:01 #1133
-
2 June 2019, 07:34 #1134
Im going to try the light on different rifles so I have LWRC's 45 degree mount on one rifle which did not come with the screws but I beleive the screws that come with the Surefire M300 will work on that one so I need the surefire screw size.
I also picked up Magpuls 45 degree offset mlok mount for my sons rifle but after looking at it again this morning I noticed it came with the screws. But I will still be short a couple of sets of screws for the other rifles. I guess I just need the surefire m300 scout light body screw size...Last edited by Stone; 2 June 2019 at 07:49.
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
2 June 2019, 07:51 #1135Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
2 June 2019, 07:53 #1136
-
2 June 2019, 07:57 #1137
-
2 June 2019, 08:46 #1138
LWRC mount:
Those screws are from the Magpul mount which I beleive will be #8-32x 3/8" Black Oxide Stainless Steel Button Head Socket Cap Screws. Thanks for the screw size Will, I will try them out on Monday when I pick up your package from the PO. That should leave me about a 1/4" of threads going up into your light body, do you think that will be enough?Last edited by Stone; 2 June 2019 at 08:50.
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
4 June 2019, 20:12 #1139
FDS_7913 by Damage Photos, on FlickrGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
5 June 2019, 16:12 #1140
Its a great light, very defined beam with minimal spill. Compared it to the X300u and at 325 Lumens its brighter than the surefire at 500 lumens. Its hard to describe but the beam is very direct and intense... I think runtime is around 45-60 minutes IIRC. Just ordered another 300 body and a E1HT for my sons rifle. Ha! Now UW will have to upgrade...
The best way to survive a violent encounter is to be the one inflicting the most violence.