Results 151 to 165 of 1202
Thread: New Sponsor: Arisaka Defense
-
8 December 2014, 15:53 #151Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
Sent from my iPhone using Tapatalk
-
8 December 2014, 18:51 #152
Looks very nice!
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
14 December 2014, 18:22 #153
Military Morons put up a nice write-up of the ring mounts and inline scout mounts with tons of pictures: http://www.militarymorons.com/weapon...4.html#arisaka
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
19 December 2014, 19:22 #154
Just a little update. Mini scout bodies are scheduled to be back from ano on Monday, and will probably be available the following week after I return from Christmas.
Today I received a 3d printed prototype of the upcoming 45 degree scout mount. The KeyMod version will use BCM's proprietary reverse threaded torx screws, which allows us to make the mount about 4mm thick. The prototype shown below is very simplified without the usual styling of our products, since trying to 3d print too much detail looks like crap. Otherwise it's completely functional. There are 4 lateral positions for mounting the light, and it fits very snug on the Noveske NSR.
In the pictures the light is positioned in the 2nd location on the mount closest to the top Picatinny rail.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
20 December 2014, 06:45 #155
-
20 December 2014, 14:58 #156LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
I want that scout body!! GRRRRRRRRRRRR
Can't wait!
-
20 December 2014, 18:10 #157
Yeah, that's good. Snug it in there tight.
Matt Helm
-
20 December 2014, 18:15 #158WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
nie very nice
-
21 December 2014, 04:07 #159
Nice....My NSR needs a light setup.....
-
21 December 2014, 08:12 #160
Couple more pictures showing a stock M300B using the outer-most offset position, which lets the head clear the super wide Diamondhead front sight on an NSR handguard.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
21 December 2014, 10:46 #161
Another picture of the final profile shape, which is even slimmer than the original raw body I showed.
Stock left, Arisaka right:
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
21 December 2014, 12:21 #162
-
21 December 2014, 12:22 #163
Gonna be ordering a hand stop from you for my daughters AR-47 build and probably a light mount for my brothers M4 clone if he decides to put a light on it.
Just a regular guy.
-
23 December 2014, 07:52 #164
Pic from Walt of one of the new bodies, pre-final length machining. Anodizing turned out to be a close match, at least on the sample M300B he has.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
23 December 2014, 08:04 #165
This is looks very good!