Results 1 to 15 of 122
Hybrid View
-
17 November 2014, 15:21 #1
-
17 November 2014, 16:43 #2
So no lever or mechanism to disengage the latch? Just pull and release? I like the look of it.
-
17 November 2014, 16:48 #3
I'm interested
-
17 November 2014, 17:04 #4
-
17 November 2014, 17:14 #5
Not sure how I feel about these charging handles with less parts. I've got one of the first Raptors without the lasered logos and it's been my favorite.
-
17 November 2014, 17:40 #6
GOST, did you catch a price on this? I tried the Raptor, and it wasn't at all for me. This "lever-less" CH looks pretty interesting though. I wish someone would do a review on one so I don't have to be my own test dummy. I removed a thin layer of skin on my right hand with the Raptor, and promptly gave it to someone else needing one to finish a rifle for a friend. Since then, I'm still not crazy about the idea of an ambi CH, after jamming my fingers under the CH and F/A, but this one looks doable and could double as an "ambi" with the lack of a lever being needed.
FTNRA Life Member
Basket full of Deplorables Life Member
-
17 November 2014, 17:50 #7
-
17 November 2014, 18:21 #8
Same here, but I prefer the Mod 3. Also own one PRI Gas Buster. But I liked the idea of the MEGA arms not using a lever at all. However, GOST brought up the point that the Ambi's work well on certain upper receivers with a shorter FA. I'm certainly not going to change out receivers to try one, nor did I think GOST was suggesting that, but I don't want to lay out another $80 or so for a CH, just to give it away a day or two later.
Maybe, as GOST suggested, someone will do a review on this soon, and that issue (clearance) will be addressed.NRA Life Member
Basket full of Deplorables Life Member
-
17 November 2014, 18:44 #9
I am curious how it releases then, when you cycle the rifle. Without a lever it seems like it will put excessive wear on the upper that the CH catches on...
-
18 November 2014, 05:54 #10
I already ditched all of my uppers with forward assist, so skinning my knuckles isn't an issue. I like the SLR, even more than the Raptor and Gunfighter, both of which are lightyears ahead of the standard charging handle. Some people have had issues with the SLR being too tight on their uppers and causing excessive wear. I haven't experienced that, but I could see how that could be an issue if your upper is on the thicker side of the spec. Looks like Mega has found a way around that issue, this should work on any thickness upper.
-
17 November 2014, 18:11 #11
-
17 November 2014, 18:07 #12
FT they didn't have a price listed yet, maybe it will be released tomorrow. Maybe we will get lucky there will be a MrGunsNgear review.
-
17 November 2014, 18:59 #13
Depending on price I think I'll try it on this build. I was a planning on just going with another BCM Mod 3. Even though it is pinchy.
Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
17 November 2014, 19:56 #14
Here's the similar from SLR.
http://slrrifleworks.com/index.php?r...product_id=359
-
18 November 2014, 06:07 #15