Does This Exist?

[JHoward]

I'm looking for something full-floating, 2 piece drop-in, like the DD Omega, with a continuous top rail, but with M Lok side and bottom. Not quad rails. Does that exist?

Basically, I want to have a rail to drop onto my pinned FSB 11.5 carbine, but I'm not a fan of 3 acres of rail space.

[Naytwan]

https://www.midwestindustriesinc.com...tegory_ID=1299

Its not free float but its the closest I see. Still uses the delta ring.

[JHoward]

That would fit the bill, if it's solid. I need to do some research because I want to mount the optic on the handguard.

[RobSWVA]

I'm looking for something full-floating, 2 piece drop-in, like the DD Omega, with a continuous top rail, but with M Lok side and bottom. Not quad rails. Does that exist?

Basically, I want to have a rail to drop onto my pinned FSB 11.5 carbine, but I'm not a fan of 3 acres of rail space.

check out Geisselle's page, they have another handguard that is a bit different than my EMR that has a full top rail that is M-LOK. used it as a mock up option on Gunstruction for my build since they dont have the EMR as an option in the app. here is a pic of that mockup, you can kinda get an idea of what it looks like, though its not the best picture for up close view of the rail. and if i remember correctly, the barrel nut doesnt have any holes you have to pass the gas tube through. but you can always go to the Gunstruction site and mess around w/ a build on there and see it much better.



here is the link to their website to see the handguard better. not sure if it is within your budget, but the first option that fit your description that came to mind

http://geissele.com/rails.html?cat=84

[UWone77]

https://www.midwestindustriesinc.com...tegory_ID=1299

Its not free float but its the closest I see. Still uses the delta ring.

For MLOK, this is pretty much your only option at this point.

[Gaspipeshooter]

I realize it's not MLOK, but I have this on my pistol: http://www.midwestindustriesinc.com/...tegory_ID=1210

Here's a picture with rail sections installed:

[JHoward]

I realize it's not MLOK, but I have this on my pistol: http://www.midwestindustriesinc.com/...tegory_ID=1210

Here's a picture with rail sections installed:

This is perfect. Thanks! I know what I want to ask for from Santa this year!

[Gaspipeshooter]

This is perfect. Thanks! I know what I want to ask for from Santa this year!

You're welcome.

[Naytwan]

Those are nice. You have to remove the delta ring but it uses the factory barel not. I had one a few years ago. The railed model and I just had to take my dremel and cut off the ring and it dropped right on behind the front site. I think I still have a photo of that rifle.

[Naytwan]

Found it. This is the old style with rails. I need to build another like this one.

[KevinBLC]

Found it. This is the old style with rails. I need to build another like this one.

hope you build it without the FSB and a magnified optic.

[JHoward]

I'm an FSB freak. It never bothered me with a scope or without.

[Naytwan]

hope you build it without the FSB and a magnified optic.

It was a 1-4 and you could see the front sight bus at 1 but at 4 is was fully gone.