Results 31 to 43 of 43
-
3 January 2015, 00:02 #31
-
3 January 2015, 05:43 #32LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
Posted a pic of the entire weapon in the NFA gallery
-
3 January 2015, 07:25 #33LEO / MIL
- Join Date
- Sep 2014
- Location
- NW Pennsylvania
- Posts
- 81
- Downloads
- 0
- Uploads
- 0
-
3 January 2015, 07:46 #34
10.5 BA barrel w/ 10" ALG
-
3 January 2015, 07:51 #35
-
3 January 2015, 08:15 #36LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
The inner diameter of the URX is 1.55" and the diameter of the Saker is 1.5"
A person at silencerco said that they've mounted a Saker inside a URX 4, so it should be g2g.
Don't know about the dimensions of the SDN. But even if the Saker and SND had identical dimensions, I think a Saker would be easier to mount and un-mount. You more or less unscrew a Saker to remove it and with the SND you would have to activate a latch to free the teeth, and that might be hard or impossible to do when you are talking about .05" of space to work with.
-
3 January 2015, 09:00 #37LEO / MIL
- Join Date
- Sep 2014
- Location
- NW Pennsylvania
- Posts
- 81
- Downloads
- 0
- Uploads
- 0
-
11 April 2015, 10:11 #38LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
just closing the loop on this thread.
I expected the Saker to nestle inside the hand guard by 1-2mm but as you can see, it sits about 1mm above the end of the rail.
-
11 April 2015, 10:19 #39
-
11 April 2015, 11:01 #40LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
-
11 April 2015, 11:04 #41
-
11 April 2015, 12:24 #42LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
-
21 April 2015, 08:14 #43
I have a similar question, that maybe someone can answer...
12.5" Noveske barrel, Daniel Defense Lite Rail III 12.0, Saker/Omega Mount?WWW.TACTICALYELLOWVISOR.NET