Results 1 to 14 of 14
Thread: 11" C4??
-
28 November 2014, 17:25 #1Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
11" C4??
I could've sworn I saw a 11" C4 rail but know can't find it. That would be ideal for my SBR.
Sent from my iPhone using Tapatalk
-
28 November 2014, 17:27 #2Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
And what rail is this?
Sent from my iPhone using Tapatalk
-
28 November 2014, 17:29 #3Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
Another question lol.
What would happen to a C4 rail if say, a good 3/4 of it overlapped my Lantac Dragon? 😁
Sent from my iPhone using Tapatalk
-
28 November 2014, 17:44 #4
First question is I don't believe the C4 was ever made in 11", I've seen both 10" and 12". The CMR is available in 11". Second question is that is a PWS rail that they don't make anymore, it also was not free float. Third question is I don't think it would be a good idea to overlap a muzzle break, to much side blast. There some pics floating around where the side blast has actually ruptured the handguard. If you're wanting a quad rail for an 11.5" barrel I would recommend a Knights Armament URX II 10.75".
Last edited by GOST; 28 November 2014 at 18:10.
-
28 November 2014, 17:44 #5
No such thing as an 11" C4.
If the ports are blasting into the interior of the rail, I would not do that.
-
28 November 2014, 17:48 #6Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
Damn I swear I saw one lol. Thanks guys. May just go with the C4 in 10" so I can just use my existing bbl nut. Easier swap
Sent from my iPhone using Tapatalk
-
28 November 2014, 17:55 #7
-
28 November 2014, 17:58 #8WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
wow. first time seen that
-
28 November 2014, 18:00 #9
Wow. Really shows how much concussion comes off
-
28 November 2014, 18:04 #10
Just goes to show you why you need to "shoot the gun" This was posted on M4c last year. The OP admitted it was his fault, and learned a valuable lesson.
However, Fortis stepped up and replaced his rail, even though it was his fault. Now that's some customer service.
Unless it's a Linear Comp or a KX3/5 DO NOT place muzzle devices inside of a handguard.
-
28 November 2014, 18:06 #11Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
That looks like a BCM comp too. I figured it was a bad idea as the dragon has some serious blast
Sent from my iPhone using Tapatalk
-
30 November 2014, 13:09 #12Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0
I really want a C4 but that'll make my Arisaka mount obsolete. I like the Fortis Rev as well and the mount will work but I'm just not sure I trust it. Perusing the interwebs I've come across some not so good stuff concerning the Rev rail.
Sent from my iPhone using Tapatalk
-
30 November 2014, 13:40 #13
-
30 November 2014, 13:55 #14Senior Member
- Join Date
- Sep 2014
- Posts
- 556
- Downloads
- 0
- Uploads
- 0