Results 16 to 30 of 38
Thread: Homemade "Shoot and See" targets
-
2 January 2015, 00:56 #16
Just cover the whole piece of cardboard in Saran Wrap and tape on back. Like I said it probably won't last as long but it should be a whole lot cheaper than packing tape
-
2 January 2015, 07:10 #17
I bought store brand paper and a 3pack of tape from Walmart and it wasn't bad at all. Definitely cheaper than real Shoot N C targets
-
2 January 2015, 08:14 #18
This is pretty cool. I've got TONS of 'neon' colored paper at work and have wondered before if I could make my own. The tape is where I was failing.
Thanks for sharing.Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
2 January 2015, 09:38 #19
-
2 January 2015, 09:58 #20Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
2 January 2015, 09:58 #21
-
2 January 2015, 10:01 #22Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
2 January 2015, 10:02 #23
-
2 January 2015, 10:12 #24Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
2 January 2015, 10:57 #25
-
2 January 2015, 11:31 #26Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
2 January 2015, 13:56 #27
Former11B, sorry I know it's off topic, but others posted target stand info --------- so here's mine:
The National Wild Turkey Federation had dimensions for a pretty neat target stand. I did some Excel calculations to see the most cost effective cutting. They call for 2" Schedule-40 PVC. If you buy three 10 foot pipes you can make four stands with minimal scrap. Total cost was less than a C-Note for four stands with 2x2 furring strips. If you want the cutting guide, let me know. Cell phone pix below.
Picture of the cut and glued pieces - if you only glue these pieces it comes apart for easier transport:
Picture of one stand assembled - you can use 1x2 or 2x2 furring strips cut to any height you want. Dimensions fit standard target boards.
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
2 January 2015, 14:05 #28
Wow looks good Jerry! I like how you only glued certain pieces for easy takedown & transport. I live on my range so my stands rarely move so I wanted maximum strength. They've held up pretty good. If I know it's gonna storm real bad I'll put em in the barn.
I would also like the plans if you'd PM them. Can never have to many things to shoot at :)
-
2 January 2015, 14:29 #29
PM Sent
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
2 January 2015, 15:56 #30
Those are sweet looking stands Jerry
Just a regular guy.