Rainier Arms 5.56 Switch Rail

[Dstrbdmedic167]

So I was checking out revolvr when I saw these!! I like the cut RA outs on these. All info from and pics from Revolvr

First up is the 12"




This version of the quick detach rail system SWITCH is a Rainier Arms exclusive. It features a brand new mechanism that allows a tool-less removal of the rail itself for easy access to the proprietary barrel nut and gas block, and what we believe is most important, is to be able to quickly change rails for a variety of mission or competition specific setups. This 5.56 versions weighs in at a mere 8.5 oz for the 12.42". Each model will feature Keymod Slots and QD Attachment Points at the 3, 6 and 9 O'clock position as well as a full length Picatinny Rail on top. Features: • Material: Aircraft Grade 6061-T6 Aluminum / Locking handle: 7075-T6 Aluminum • Length: 12.42” • Weight: 8.5 ounces minus barrel nut. Barrel nut is 1.6oz. • Rotation Limited QD Sockets • Mil. Spec. Hard-coat Anodized • 4140 heat treated barrel nut (1-7/16 X 16 T.P.I.) • Clamp torque setting 20 in lbs • Spanner wrench needed to torque barrel nut to spec (not included) • Made in the USA!

This is the 14" Version




This version of the quick detach rail system SWITCH is a Rainier Arms exclusive. It features a brand new mechanism that allows a tool-less removal of the rail itself for easy access to the proprietary barrel nut and gas block, and what we believe is most important, is to be able to quickly change rails for a variety of mission or competition specific setups. This 5.56 versions weighs in at a mere 9.8 oz for the 14.76". Each model will feature Keymod Slots and QD Attachment Points at the 3, 6 and 9 O'clock position as well as a full length Picatinny Rail on top. Features: • Material: Aircraft Grade 6061-T6 Aluminum / Locking handle: 7075-T6 Aluminum • Length: 14.76” • Weight: 9.8 ounces minus barrel nut. Barrel nut is 1.6oz. • Rotation Limited QD Sockets • Mil. Spec. Hard-coat Anodized • 4140 heat treated barrel nut (1-7/16 X 16 T.P.I.) • Clamp torque setting 20 in lbs • Spanner wrench needed to torque barrel nut to spec (not included) • Made in the USA!

[UWone77]

Thanks for beating me to this. Moved it to the New Product Section.

Man, you guys are good lately!

[Dstrbdmedic167]

Thanks for beating me to this. Moved it to the New Product Section.

Man, you guys are good lately!

Sorry I'll post em there from now on. Hope it's cool.

[JHoward]

Thanks for beating me to this. Moved it to the New Product Section.

Man, you guys are good lately!

I keep dreaming of the day I beat you to posting something! :D

[Dstrbdmedic167]

I keep dreaming of the day I beat you to posting something! :D

i was kind of excited I beat both GOST and UW!! I'm also pretty excited about the rail since I have the 308 version.

[UWone77]

Sorry I'll post em there from now on. Hope it's cool.

Well, actually I moved it, because only mods have the ability to start threads in that section.

No worries.

[Dstrbdmedic167]

Well, actually I moved it, because only mods have the ability to start threads in that section.

No worries.

Ok I'll leave the cool posting to you 😔

[UWone77]

Ok I'll leave the cool posting to you 😔

Are you kidding me? You guys are doing me a favor!

Much easier just to click twice and move a post!

[GOST]

Thanks DSTRBD, good catch.

[Dstrbdmedic167]

Are you kidding me? You guys are doing me a favor!

Much easier just to click twice and move a post!

Fair enough. Guess the mega arms post needs moving too

[Gaspipeshooter]

Are you kidding me? You guys are doing me a favor!

Much easier just to click twice and move a post!

http://www.weaponevolution.com/forum...antac-triggers

[mustangfreek]

Thanks for beating me to this. Moved it to the New Product Section.

Man, you guys are good lately!

...

ya just seen this....nice looking rail

[cjd3]

Yeah, that rail just moved to the top of my list.