Results 121 to 135 of 138
Thread: MEGA Arms Wedge Lock Handguard
-
4 December 2016, 09:51 #121
Yes, I have their Low pro gas block on a 16" mega heavy profile barrel with the 14" wedgelock(M-lok) Plenty of clearance. The only place where clearance is an issue will be with Mlok accessories (screw protrusion) directly under the gas block. Sides of the rail are fine. FWIW I also dimpled and pinned the gas block.
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
4 December 2016, 10:16 #122
-
4 December 2016, 10:19 #123New Member
- Join Date
- Nov 2016
- Posts
- 7
- Downloads
- 0
- Uploads
- 0
-
4 December 2016, 10:57 #124
Yep, I used the BRD engineering jigs. Their dimple jig has a pointed screw that aligns itself by setting itself into the gas port. I double dimpled it and loctited the screws and let it sit for a day. Then I used their pinning jig, drilled it, reamed it and pinned it. IMO the dimpling is paramount to perfect alignment of the block. If you don't then the block may be canted when pinning and will hit the inside of the rail. The top of the gas block has to fit square inside the gas block notch inside the rail.
http://brdengineering.com/ Jake is a good dude.
https://www.youtube.com/watch?v=PMm6nieDP2MThe best way to survive a violent encounter is to be the one inflicting the most violence.
-
4 December 2016, 13:11 #125
-
22 January 2017, 22:23 #126
It's a super tight fit, but the Unity M-LOK Compatible FUSION Adapter tucks the Scout in very close. I had install the KAC Micro front sight first, and there was definitely some pressure that had to be exerted to pop the Scout into place. The screws that came packaged with the FUSION Adapter were also too short, had to run to Home Depot and buy some #8-32×1/2 screws.
-
11 October 2017, 22:14 #127
Just FYI, Zev has .308 versions up now, too: http://www.zevtechnologies.com/rifle...033.1507000064
-
12 October 2017, 08:11 #128
Well I guess its official now, no more Mega lowers...
http://www.zevtechnologies.com/forged_lower_ar15The best way to survive a violent encounter is to be the one inflicting the most violence.
-
13 October 2017, 17:51 #129
-
14 October 2017, 17:59 #130
-
15 October 2017, 08:34 #131
Whaaaat?? The atomic symbol is unique, the Zev logo looks like the autozone logo. Lame...
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
15 October 2017, 08:43 #132
-
15 October 2017, 09:08 #133
If that's what it is indeed modeled after then I do retract the "lame" comment...
The best way to survive a violent encounter is to be the one inflicting the most violence.
-
11 April 2018, 22:50 #134
Just as an FYI, the Zev WedgeLocks are 6061, rather than 7075 like the Mega and Hodge.
-
11 April 2018, 23:58 #135
Like I said before, Mega is gone and Zev will take the profitable products and merge them into their product line. Sad to see they are cheapening the manufacturing to increase profit but not surprised one bit.