Results 1 to 15 of 21
-
29 January 2015, 18:42 #1
TRIARC Systems Web-Site Goes Live
Check them out for TRACK rifled barrels and more.
http://triarcsystems.com
-
29 January 2015, 19:39 #2
Good looking barrels! Never heard of them. Any reviews? Etc?
-
29 January 2015, 19:41 #3
-
29 January 2015, 19:51 #4
-
29 January 2015, 19:55 #5
First time I've seen a 12.5" barrel running a mid-length gas system.
http://triarcsystems.com/product/12-...fluted-barrel/
-
29 January 2015, 19:58 #6
That 12.5 mid length fluted is interesting looking.
-
29 January 2015, 20:11 #7
-
30 January 2015, 19:30 #8New Member
- Join Date
- Jan 2015
- Posts
- 10
- Downloads
- 0
- Uploads
- 0
I actually have one of the 12.5" Midlength Gas Fluted barrels. I have to say it LOOKS incredible. In the limited shooting I've done with it, paired with good ammo (M193), and a VLTOR A5 system (stock A5 buffer, can't remember the name, but the one that comes in the kit), it's run without a hiccup. Locks the bolt back on the last round, feeds and loads well, etc.
Chris, the guy who runs Triarc, is good people too. I was put onto them by the crew at Geissele, and they most certainly didn't steer me wrong.
And yes, I know this thread is worthless without pics. I'll try to pop the safe open tomorrow to show off the complete rig.
-
30 January 2015, 19:50 #9WEVO Spell Checker
- Join Date
- Sep 2014
- Location
- Florida
- Posts
- 3,198
- Downloads
- 1
- Uploads
- 0
to be honest love to build an upper around that barrel
$300 and 10 Pastrami Sandwiches and a case of Diet Coke. ( UWone77)
-
30 January 2015, 20:26 #10
-
31 January 2015, 16:49 #11New Member
- Join Date
- Jan 2015
- Posts
- 10
- Downloads
- 0
- Uploads
- 0
No photos yet...I've got performance anxiety when I compare my shitty iPhone photos to the works of art most of you guys post here.
However-the full details of my build are:
AXTS A-DAC-F Lower (SBR'ed)
Daniel Defense LPK
Geissele SSA Trigger
Magpul K2 Grip
Magpul SL Stock
BAD-CASS-ST
BCM Forged Upper
Triarc Systems 12.5" Fluted Midlength Barrel
Triarc Systems NP3 BCG
BCM Ambi Gunfighter CH
Geissele Super Gas Block (carbon steel) (Barrel dimpled for set screws, but not drilled for pinning...yet)
SilencerCo Trifecta RS Flash Hider
ALG Defense EMR M-Lok 10" Rail
Arisaka Defense Finger Stop
Arisaka Defense M-Lok Scout Mount
Arisaka Mini-Scout Body
Malkoff Scout Head
MBUS Pro BUIS
Aimpoint T1 on a DD Fixed Mount.
-
31 January 2015, 16:52 #12
-
31 January 2015, 17:26 #13
-
31 January 2015, 17:28 #14
-
31 January 2015, 18:07 #15New Member
- Join Date
- Jan 2015
- Posts
- 10
- Downloads
- 0
- Uploads
- 0
Ask and ye shall receive.
The white crud around the flash hider in photo #2 is where I got a little too over eager with Rocksett for the flash hider.
If you look closely, you can see that the gas block sticks out just a touch past the end of the 10" ALG Rail. Not so far that I think it will be a problem when shooting. I tried the 12" ALG rail, and it looks to be cutting it too close to the muzzle device to let me seat my suppressor (762 Saker, once it leaves NFA Jail). I won't know for certain for a bit still though.
You can also see the fluting on the barrel some in photo #2. Even with the fluting, this is a medium profile barrel, so it has some heft to it. Triarc lists the weight at 27oz. If you're going for the absolute lightest build possible...you'll want something else. That being said, all the mass is in the right places (towards the receiver, etc), so the rifle moves and points very well.