Results 1 to 13 of 13
-
16 April 2015, 13:11 #1Contributing Member
- Join Date
- Oct 2014
- Posts
- 198
- Downloads
- 0
- Uploads
- 0
Lantac enhanced BCG vs Sharps Balanced BCG
Anyone have any experience with these? I watched a review video on the sharps and came away impressed.... It really demonstrated how they moved the weight down and increased contact patches to reduce wear
Sharps:
S7 steel
reliabolt
NP3 (is better than NiB) supposedly has teflon all the way through
"balanced" design
increased contact points
Lantac:
standard 8620 steel
rounded cam pin
NiB (but patented with lower CoF)
better gas ports
+$80 over sharps
i just want whichever would shoot smoother/better finish.
-
17 April 2015, 20:06 #2
What kind of gun are you going to put this in?
-
17 April 2015, 21:48 #3
Cryptic Coatings Black Mystic over both. I have 20K+ through one which I will be writing an updated review shortly and its damn black magic how well it's held up and easy to clean. The CVD process is superior to both NP3 and NiB.
FFL 07/ NFA 02
TWN Certified Hydro Dipper
-
18 April 2015, 13:36 #4
-
20 April 2015, 06:34 #5Contributing Member
- Join Date
- Oct 2014
- Posts
- 198
- Downloads
- 0
- Uploads
- 0
It's going in a Noveske 14.5" pinned upper. Ill check out the Mystic. Why do you say it's better?
That titanium bolt is seeeeeeeeeeeexyyyy and $$$$$$$$$$$!
-
20 April 2015, 07:04 #6Contributing Member
- Join Date
- Oct 2014
- Posts
- 198
- Downloads
- 0
- Uploads
- 0
I just checked out the mystic and read some reviews. The coating seems really great, i just hate that there is nothing new about the BCG like the sharps or lantac. I think Im going to give the lantac a try but i cant find anyone running it really besides youtube vids.
-
20 April 2015, 08:06 #7
Kopis you may want to checkout this thread and get a hold of Schambers.
http://www.weaponevolution.com/forum...ghlight=lantac
-
20 April 2015, 08:21 #8Contributing Member
- Join Date
- Oct 2014
- Posts
- 198
- Downloads
- 0
- Uploads
- 0
Good thread, thanks! Most BCGs are around $190-220 with the higher end ones running $260-300 (salient). My gun is tungsten gray with black accents so i feel the lantac plays to that as well.
-
20 April 2015, 21:11 #9Senior Member
- Join Date
- Jul 2013
- Location
- Bentonville,AR
- Posts
- 783
- Downloads
- 0
- Uploads
- 0
My favorite manufacturer/builder/whatever you want to call them uses a QPQ BCG. However, that being said, I am still very loath to not drop a Colt BCG in my Hodge Defense MOD 2 when it arrives.
Why?
Because I know the C158/Phosphate works, and works well.
Because the BCG PiP was shut down early because it destroyed every other entrant. Including all the NiB and others.
That said...the new QPQ BCG's...I have not heard of any having issues except RCA's, due to dimensional problems (I had these issues). I have seen and owned some that have peened lugs, though. I question the viability of QPQ as a heat-treat process. However, some have said that even mil-spec BCG's peen...but the one I replaced the RCA BCG with didn't. Hmmm...so I don't know.
But I DO KNOW that a Colt BCG is going to work. And work well.
-
21 April 2015, 01:53 #10
-
21 April 2015, 06:36 #11Contributing Member
- Join Date
- Oct 2014
- Posts
- 198
- Downloads
- 0
- Uploads
- 0
Ha, touche. Just the upper is noveske. Spikes Jolly Roger Lower with Parlay, Plunder, ARGH markings, Minimalist stock. Reeeaaally like the upper though, it's super light but GD is that battlecomp loud.
I ended up finding a lantac for $229... Should be in next week, Ill post some pics of it installed.
-
21 April 2015, 10:11 #12
-
21 April 2015, 11:52 #13Contributing Member
- Join Date
- Oct 2014
- Posts
- 198
- Downloads
- 0
- Uploads
- 0
Will do. I have a salient BCG in my pistol. Not overly impressed. The finish is really nice but the machined gas key is a problem that didnt need fixing. It runs good though. Ill be honest, i was mainly going for looks.
I like the innovation that lantac employed... We'll see about their new NiB finish. Supposedly it's has more lubricity than regular NiB. I dont know if it's all the way through the finish like NP3.