Results 16 to 30 of 62
-
8 May 2015, 20:44 #16
Member
- Join Date
- Sep 2014
- Posts
- 30
- Downloads
- 0
- Uploads
- 0
-
8 May 2015, 20:46 #17
-
8 May 2015, 20:48 #18
I need this. Preferably already drilled for taper pins and a FSP.
NRA LIFE MEMBER
Veteran Combat Medic
Experience is what you get... When you don't get what you want.
-
8 May 2015, 21:42 #19
There are currently two 12.5" mid-length barrels that I know of on the market, both utilize a proprietary rifling. Both the Rainier Arms with Ratchet rifling and the Triarc with Track rifling are a single edge polygonal rifling. This provides a tighter seal of the projectile and reduces forward escaping gases, therefore minimal loss of gas pressures allowing the use of a longer gas system.
-
8 May 2015, 21:50 #20
-
9 May 2015, 06:51 #21
Member
- Join Date
- Sep 2014
- Posts
- 30
- Downloads
- 0
- Uploads
- 0
-
12 May 2015, 06:33 #22
Question sort of on topic and sort of off topic. Does anyone make a CHF 12.5 (or so) barrel?
Next question for all you SBR owners... in 5.56 I understand that the short barrel makes the gun REALLY LOUD. How much more loud are we talking? And is the same thing true for .300 BO?
I am thinking of SBR'ing a lower but I am initially leaning towards doing it in 5.56 mainly because I won't have to stock a bunch of other ammo.
Considering the SBR will be a 100 yards and in gun (my designated purpose) what are the pros and cons to my thinking?
I keep coming back to suppressing a 12.5" 5.56 but I think a .300 will be a ton quieter.
If I do my SBR I am thinking some sort of a red dot, maybe a SRS on top... but right now it's just in the 'maybe' category.
-
12 May 2015, 06:44 #23
Member
- Join Date
- Jun 2008
- Location
- MN
- Posts
- 98
- Downloads
- 2
- Uploads
- 0
Centurion Arms and Palmetto State both offer 12"-ish CHF barrels. I've got the Centurion barrel and it's a tack driver. Mine's loud but I run muzzle brakes on it so it's hard to tell if it's that much louder than my other guns. It doesn't bother me, though.
-
12 May 2015, 08:28 #24
It's louder but not annoyingly so as long as you don't use a brake or comp.
Will - Owner of Arisaka LLC - http://www.arisakadefense.com
-
12 May 2015, 08:31 #25
Noveske used to make the best 12.5 CHF barrel on the market. They widely considered the 12.5 their best barrel. Not sure about the qualities of the new ones, but I've got a 12.5 from when Johnny was still around and it's been a great barrel. Still have an old 18T shooting a M4-1000 on it.
-
12 May 2015, 09:03 #26
More then likely, if you go ahead and file the paper work for an SBR lower you'll end up with multiple uppers for it. Just a feeling
-
12 May 2015, 11:30 #27
I can feel the money draining out of my wallet already.
I'm up in the air if I should SBR my current lower or just buy a new one.
That said just a couple of observations....if I SBR it and then suppress it I'm really not gaining much because the OAL is still out there. If I do it though I'm thinking a CMT billet lower and a billet slick side upper with a 12.5 CHF barrel.
I'm still not entirely sold on an SBR in general but the more I learn the more I can see its use.
At least so far that's the concept. I would probably want a new lower with a different stock for an SBR.
-
12 May 2015, 11:46 #28
I almost went billet as my first SBR lower and I can totally see the appeal. After talking with the guys here tho I'm glad their advice sunk in and that I went with a forged BCM as my first. You can always get a more boutique lower later to SBR...
Sent from my iPad using Tapatalk
-
12 May 2015, 11:50 #29
Why? Reason with me.
I am 95% about utility so the jury is still out on building an SBR..
Is it a weight issue or something else that says don't go billet?
-
12 May 2015, 12:00 #30
Rainier Arms UltraMatch .223 Wylde Mid Barrel - 12.5"
It's the Industry standard. Plus when have you ever read about a forged lower being "worn" out? I'm sure there are government Colt lowers in rotation that have seen untold millions of rounds and decades of abuse and still going strong.
What really sold me was this.. You will have this SBR lower for the rest of your life. What looks good now in billet might not in 2030. Forged lowers will remain a timeless look.
Edit: Here's the thread where I asked the same question billet vs forged for SBR. Guys smarter then i on the subject, giving better answers then i can give honestly.
Sent from my iPad using TapatalkLast edited by DutyUse; 12 May 2015 at 12:19.