WEVO Engraved RA GEN 3 Logo Poll

**UWone77** · 4 June 2015, 10:37

Originally Posted by schambers

good news, I was able to justify another AR build

LOL... best answer ever.

**toolboxluis00200** · 4 June 2015, 10:51

Originally Posted by GaSwamper

Gost, can we get a limited edition luis set with a Pastrami sandwich engraved and WEVO misspelled on the side?

I have no clue how I miss this hahahahahah

**Txfilmmaker** · 4 June 2015, 19:20

Originally Posted by GOST

I do like this one a lot. 😎 It's probably highly subjective, but I think "Battle Kitty" may need to be a tiny bit smaller. Or positioned a tiny bit to the left.

Sent from my iPhone using Tapatalk

**GOST** · 4 June 2015, 19:26

Originally Posted by Txfilmmaker

I do like this one a lot. 😎 It's probably highly subjective, but I think "Battle Kitty" may need to be a tiny bit smaller. Or positioned a tiny bit to the left.

Sent from my iPhone using Tapatalk

You can't go to the left or you will be on the bevel, and if you go smaller it will be hard to laser the WEVO belly on his belly. It's hard to tell from looking at a pic but the cat as pictured is only 1.5" tall.

**Thompson** · 4 June 2015, 19:41

Originally Posted by GOST

You can't go to the left or you will be on the bevel, and if you go smaller it will be hard to laser the WEVO belly on his belly. It's hard to tell from looking at a pic but the cat as pictured is only 1.5" tall.

... so WEVO logo = WEVO belly now

**UWone77** · 4 June 2015, 21:17

Personally, I'm starting to lean back towards the standard WEVO Logo...

**Txfilmmaker** · 4 June 2015, 21:48

Originally Posted by GOST

You can't go to the left or you will be on the bevel, and if you go smaller it will be hard to laser the WEVO belly on his belly. It's hard to tell from looking at a pic but the cat as pictured is only 1.5" tall.

Boundaries... Always getting in the way. ;-) Like I said, it's subjective. I do like the partial logo on that side with the full logo on the other.

I just took another look at the photo and blew it up a lot larger. I've been looking at it on my iPhone. When I blew it up, the Battle Kitty looked fine where it is.

Sent from my iPhone using Tapatalk

**Aragorn** · 4 June 2015, 22:39

I still say go for all three. Tacticat magwell left side, dirty girl right side, WEVO logo near selector markings as pictured.

**3 AE** · 4 June 2015, 23:44

Just my two cents. WEVO logo on the left side. "WEAPON EVOLUTION" in the same font/script on the right in two lines with a slight offset. Third line, "CAL.: MULTI". Fourth line is the serial number, "WEVO 0001".

Tacti Kitty/Cat logo, fine for a morale patch, key chain, t-shirt, etc, but on a working gun? Hmmmm... I can hear it now at the range. "Hey dude, what ya got there, a "Tacti-PUSSY" lower? LOL

Dirty Girl. Makes for a cool tattoo or truck mudflaps! Just saying.

**din** · 5 June 2015, 00:44

Originally Posted by 3 AE

Just my two cents. WEVO logo on the left side. "WEAPON EVOLUTION" in the same font/script on the right in two lines with a slight offset. Third line, "CAL.: MULTI". Fourth line is the serial number, "WEVO 0001".

Tacti Kitty/Cat logo, fine for a morale patch, key chain, t-shirt, etc, but on a working gun? Hmmmm... I can hear it now at the range. "Hey dude, what ya got there, a "Tacti-PUSSY" lower? LOL

Dirty Girl. Makes for a cool tattoo or truck mudflaps! Just saying.

Heaven forfend someone impugn your already obviously threatened masculinity, Benedict Arnold, Jr.

**mustangfreek** · 5 June 2015, 02:56

Can a broke ass ginger get an answer on a forged set or lower with the std wevo logo....

Thanks

**Deadwing** · 5 June 2015, 03:40

Originally Posted by mustangfreek

Can a broke ass ginger get an answer on a forged set or lower with the std wevo logo....

Thanks

The guy who engraved my trust info on the lowers i've Form 1'd also deep laser engraves logos, pictures, basically anything you want. You could DIY a WEVO forged lower. He does awesome work, and is local so you don't have to send your lower out. PM me if you want his contact info.

**DutyUse** · 5 June 2015, 04:08

Originally Posted by Deadwing

The guy who engraved my trust info on the lowers i've Form 1'd also deep laser engraves logos, pictures, basically anything you want. You could DIY a WEVO forged lower. He does awesome work, and is local so you don't have to send your lower out. PM me if you want his contact info.

That is what I had planned to do but a factory set seems a lot more legit

I like all the designs, but the plain wevo got my vote. Really like the way the "half" wevo looks on the battle cat tho

**MoxyDave** · 5 June 2015, 14:00

I can't believe the Dirty Girl isn't getting more votes. That cat looks stupid to me, maybe it's because I'm a former cat owner

**voodoo_man** · 5 June 2015, 14:07

Originally Posted by MoxyDave

I can't believe the Dirty Girl isn't getting more votes. That cat looks stupid to me, maybe it's because I'm a former cat owner

I'm current owner of both so...

wait wut?

View Poll Results: Which potential logo would you like to see on a WEVO Engraved Rainier Arms GEN 3 receiver set?

Thread: WEVO Engraved RA GEN 3 Logo Poll

Thread Tools

Display