Results 1 to 2 of 2
-
8 January 2009, 13:21 #1
Noveske/ Magpul Limited Edition MPL MOE Carbine
http://noveskerifleworks.com/cgi-bin...lay.cgi?cat=78
LIMITED EDITION MPL MOE Carbine (only 50 rifles will ever be made)
LIMITED EDITION MPL MOE Carbine
Featuring the MAGPUL MPLA lower!
14.5" Cold Hammer Forged Barrel, 1 in 7" twist, 5.56mm
--Made of Mil Spec M249 Machine Gun barrel steel, with heavy M249 Chrome Lining,
(appx. 2 times as thick as an M4 or M16)
--Extended Feed Ramps
--F marked front sight pinned to barrel
--Mil Spec Phosphate finish
--MP HP tested
--Carbine gas system, no M203 notch
--Shot peened and MP tested bolt
--Properly staked carrier key
--Auto carrier
--Forged flat-top upper receiver w/ extended feed ramps
--MOE handguard
--MAGPUL MOE buttstock
--H Buffer
--MAGPUL MOE grip
--Ambi magazine catch
--Ambi bolt release
--Flip-up rear sight
--AAC M4-2000 Blackout flash suppressor permanently installed for an over all barrel length of 16.1". This is not a Short barreled rifle, (NFA weapon).
--Four MAGPUL P-MAG 30rd mags included, black non-window
--V-TAC padded black sling
--Eagle LE Discreet Soft Case
Black only, These are in the box ready to ship. No custom additions or subtractions from the above description.
Last edited by Stickman; 8 January 2009 at 17:40.
-
8 January 2009, 13:27 #2
Component images.
Image one shows the barrel stamping, as well as the AAC M4-2000 FS which is permanently attached to the 14.5" barrel bringing it out to a legal 16".
Image two shows the proper F marked front sight base (FSB), pinned FSB, and the Magpul MOE Handguards.
Image three shows the folding BUIS, properly stake castle nut, and Magpul MOE stock.
Image four shows the Magpul MOE pistol grip, as well as part of the MPL billet receiver and trigger guard.
Image five shows the full profile of the Magpul MOE Handguard.
Last edited by Stickman; 8 January 2009 at 13:37.