Results 601 to 615 of 2009
Thread: MAIL CALL
-
6 October 2016, 14:56 #601
-
6 October 2016, 18:05 #602
-
7 October 2016, 13:39 #603LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
Got these two in the mail recently. I've been critical of ACOGS in the past because of eye-relief, but I've decided to give them another shot because there so light compared to other magnified optics.
-
7 October 2016, 13:51 #604
Do give a review on that LCO when you get a chance. Curious how it compares to Aimpoint and MRO.
-
7 October 2016, 13:52 #605Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
17 October 2016, 14:34 #606
16lbs Shooters World Blackout powder
16lbs Shooters World Match Rifle powder
2k Large Rifle Winchester primers
5k Small Rifle CCI primers
-
21 October 2016, 22:05 #607
couldn't resist... was getting tired of the socket/drill bit option
WTF? every time I post it, it shows up upside down. Original photo is correct, link is correct...???
Screw it... going for more Scotch. Y'all can figure out it's an annealing machine.Last edited by SwissyJim; 21 October 2016 at 22:12.
-----------------------------------------------
Jim
"You can never have too many guns" - my wife's actual comment
Alaska Fun
-
22 October 2016, 00:49 #608
-
22 October 2016, 11:26 #609LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
-
22 October 2016, 11:42 #610
-
22 October 2016, 18:47 #611
-
22 October 2016, 19:32 #612
-
22 October 2016, 21:41 #613
-
22 October 2016, 22:01 #614
You put enough rifles together, eventually something like this happens to the best of us.
-
22 October 2016, 22:12 #615
Indeed. Not if but when. It was only a $45 mistake for an otherwise great handguard.
The scratches around the threaded QD holes are from wrenching hard to get it off the old fashioned way.