Results 1 to 9 of 9
-
12 September 2015, 21:44 #1
A little rail selection help and question
We'll home bored and thinking about some things and am slowly piecing together a shorty upper.Didnt want to jack pyzik's thread..Anyways wanted all the rail i could.Any 8.5/8.7" rails around ?...
Last edited by mustangfreek; 27 September 2015 at 00:58.
-
12 September 2015, 22:22 #2
Not so sure it would make much of a difference with the rail going a bit over the battlecomp. The gas would still vent from the comp. I did a bunch of searching around and didn't find an 8" or 8.x" handguard anywhere.
I'm glad you posted that pic by the way. I've been wanting to know the exact measurement to the A2 sight for a mid-length gas set up because that's how I'm going to build the next rifle. 9.25" is apparently it.Freedom is NEVER Free. We have to work to protect it and even be willing to die to protect it.
-
13 September 2015, 02:36 #3
Knight's makes their URX 4 in an 8.5" version, but it's KeyMod: http://www.rogtac.com/kac-urx-4-ibn-rail-assembly-8-5/
Coupon code "facebook" will get you 5% off at ROG Tactical."It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ
-
13 September 2015, 15:39 #4
Maybe you should measure with the BABC with a crush washer or shims to get a better measurement.
-
15 September 2015, 02:09 #5
No help for the ginger.......Or just a dumb idea, say whatever i can take it......Or what 7-8" rails should i be looking at or who's got one laying around.
Or..What about one of them KAW valley 30 cal linear comps
I held the BC off the barrel a little more then a 1/16" i nthe pic to count for it.
-
15 September 2015, 02:42 #6"It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ
-
15 September 2015, 05:52 #7
-
19 September 2015, 06:21 #8
Nice
Still undecided what to do here.
-
27 September 2015, 00:59 #9
Project has been Squashed..
Thanks for the help gents.