Griffin Armament Optimus Silencer

[GOST]

Would be nice if you could buy the serial numbered sleeve separate, then send off for your stamp. Then buy the rest of it later.

[alamo5000]

Would be nice if you could buy the serial numbered sleeve separate, then send off for your stamp. Then buy the rest of it later.

Wouldn't it be nice if we didn't have to worry about any of that crap. Just click it, order it and no 5 month long wait.

[VIPER 237]

Wow. Awesome

I just don't get the ATF/NFA ruling about extra baffles/parts and how configurable cans get around that portion of it. Like if I had this in the 9mm configuration and went to the range to shoot my G19 9mm and I've left baffles and part of a suppressor tube at home....

This kind of thing shows the stupidity of these .Gov rulings and why they make no sense or have reason for existing

From what I understand is that the baffles are the same in all configurations, you're just changing blast/booster assemblies and end caps. Pretty ingenious.

[tact]

Weird there's no barrel ratings yet.

[alamo5000]

Weird there's no barrel ratings yet.

"Barrel length ratings coming soon."

It's right in the description on GA's site.

http://www.griffinarmament.com/OPTIM...ER-p/gaopt.htm

[tact]

"Barrel length ratings coming soon."

It's right in the description on GA's site.

http://www.griffinarmament.com/OPTIM...ER-p/gaopt.htm

Ahhhhh yeah I read that.......that is why I said it's weird they are not available yet which is what I took coming soon as, but thanks for the knowledge.

[VIPER 237]

Weird there's no barrel ratings yet.

http://www.m4carbine.net/showthread....mament-Optimus

[tact]

http://www.m4carbine.net/showthread....mament-Optimus

Thanks.

[Silencer Shop]

Full Sized:
Bolt gun use up to .300 Win Mag on a 24″ barrel
308/6.5CM 14.5″
6.8spc 10.5″
7.62×39 8″
300blk 8″ Super/sub
5.56mm 7.5″

Mid Size:
308 Win 16″
6.5CM 16″
6.8spc 12.5″
7.62×39 8″
300blk Super/Sub 8″
10.5″ 5.56mm

Pistol Configuration with Booster:
Up to .357 Magnum
**With fixed barrel spacer, full auto 9mm

3-Lug Configuration:
5.56mm limited full auto down to 16″
5.56mm Semi auto 14.5″
.300BLK supersonic limited full auto to 9.5″
.300BLK subsonic full auto to 8″
5.7 full auto

Direct Thread Configuration:
300BLK Subsonic and 9mm full auto rated
Rimfire full auto
5.7 full auto

[toolboxluis00200]

Maybe I can start a GoFound. So I can get one.

[DutyUse]

Good video from Military Arms on this Silencer

http://youtu.be/e4KfGPM-cJc

[Pyzik]

Good video from Military Arms on this Silencer

http://youtu.be/e4KfGPM-cJc

Just watched it this AM.

I need this in my life

Sent from my SM-N910V using Tapatalk

[DutyUse]

It does seem pretty versatile. I was planning to get an Omega & Sparrow combo to cover most of my guns but I'm seriously considering this

[GRIFFIN ARMAMENT]

It's why SIG lost in court. Baffles are also considered silencers, even though they are just parts of the whole.

Why wouldn't a Form 1 builder be allowed to make, just not assemble into the final product, all the parts before receiving the stamp on the form? Because the ATF says it's illegal.

That's why I just don't understand configurable cans and how they work around it.

Sig lost in court because they wanted permission to sell a mono-core baffle they were advertising a $200 stamp suppressor tube for, and they wanted to sell it without a tax stamp. It was kind of like asking the ATF to sell a parts kit for a silencer without a stamp. A little bold, but I wouldn't have done that arm brace thing either, and that worked for them until they sued the ATF- was that once or twice?

Our can ships in a full size configuration containing all the baffles. One baffle is removed to re-configure the can. AAC and Rugged have modular cans which are reconfigured by removing tube sections that mount the front cap and house internal baffles.

[toolboxluis00200]

Sig lost in court because they wanted permission to sell a mono-core baffle they were advertising a suppressor tube for, and they wanted to sell it without a tax stamp. It was kind of like asking the ATF to sell a parts kit for a silencer without a stamp. A little bold, but I wouldn't have done that arm brace thing either, and that worked for them until they sued the ATF- was that once or twice?

I think two times but I can be wrong