Results 1 to 15 of 18
-
12 December 2015, 07:50 #1
Need a bolt for a gemtech carrier
got a gemtech gsbc-5.56 in and need a bolt for it.
thinking this - http://www.aimsurplus.com/product.as...es&groupid=723 - but am open to anything high end.
no price limit and needs to be awesome.
suggestions?
-
12 December 2015, 07:59 #2
G&R had Colt bolts in stock a week ago. Might want to look there. His price beat the Brownell's Mil/LEO price. I think Brownell's was out when I looked.
I'll be interested in hearing your thoughts on the carrier. A buddy is getting one and claims it will cure cancer on his MK18. Personally, I'm not sure anything needs fixing when the money could go to other things (like ammo).
-
12 December 2015, 08:15 #3
-
12 December 2015, 08:25 #4
I shopped for a month of sundays and I found that it's cheaper to just buy a whole new BCG. Just my 2 cents.
-
12 December 2015, 08:29 #5
Personally, I look for C158 bolts but the ARP superbolts have a great reputation (no experience with them, personally). That Ballistic Advantage NiB bolt that Stone linked to looks like a good choice, but PA has the Fail Zero complete BCG for only $99, so for a few buck more you get a spare carrier.
If I wasn't concerned about NiB or melonite, I'd get BCM or DD:
BCM: http://www.bravocompanyusa.com/BCM-A...ssembly-mp.htm
DD: http://www.primaryarms.com/04-013-22183/p/04-013-22183/
-
12 December 2015, 08:34 #6
I will take a look, before they were released I saw them at SHOT earlier this year and have shot a few guns with it installed.
It'll not only cure cancer but a bunch of other stuff.
Thanks! I'll check them out.
Bolts aren't that expensive, even the really good ones are right under $80, which is still 1/3 of the cost of a really high end BCG unless its used but I totally see what you are saying.
I am not concerned, but want something that will mate flawlessly with the gemtech BC, so NiB may be a requirement (for me).
-
12 December 2015, 09:39 #7
If Im not mistaken I beleive the bolt from BA is the Fail zero bolt. If you go that route I would call and confirm.
-
12 December 2015, 09:41 #8
http://www.primaryarms.com/009-fzm16...fzm16-4-01-nh/
might go with this....
-
12 December 2015, 17:30 #9LEO / MIL
- Join Date
- Mar 2011
- Location
- SLC, UT
- Posts
- 606
- Downloads
- 0
- Uploads
- 0
Check out Sionics' NP3 coated bolts.
-
13 December 2015, 01:50 #10Contributing Member
- Join Date
- Apr 2015
- Location
- PNW
- Posts
- 177
- Downloads
- 0
- Uploads
- 0
I don't know if it's been mentioned yet, but I had been thinking about getting the Gemtech carrier and pairing it with a Sharps Relia-Bolt.
http://store.srcarms.com/product-p/reliabolt.htm
I have a NiB bolt from Rainier lying around as a spare, which I would I have recommended, but I didn't find it on their site (admittedly, I checked quickly).
-
13 December 2015, 04:53 #11
-
13 December 2015, 04:59 #12
Hard to beat chrome.
https://www.rainierarms.com/young-mf...w-side-charger
Plus, you're set to build a Lantac side charger!There's no "Team" in F**K YOU!
-
13 December 2015, 06:21 #13
VD Man I've seen good reviews on these from V7.
AR-15/M16 BOLT
MADE FROM CARPENTER 158 STEEL
FOR 5.56/.223/300 BLKOUT
CRYOGENICALLY TREATED TO -300°F
MPI/HPT TESTED FOR QUALITY
BLACK O-RING INSTALLED
UP TO 200% INCREASE IN LIFE EXPECTANCY
LIFETIME WARRANTY REGARDLESS OF ROUND COUNT
MADE IN THE UNITED STATES OF AMERICA
$80.00
http://www.vsevenweaponsystems.com/c...ucts/v7-ctbolt
-
13 December 2015, 06:34 #14
Any idea what the finish is on those? Doesn't say on their website. His warranty is impressive...
-
13 December 2015, 11:30 #15