Results 31 to 45 of 92
Thread: 9mm AR discussion
-
28 December 2015, 11:16 #31Contributing Member
- Join Date
- Dec 2012
- Location
- Front Range of CO
- Posts
- 343
- Downloads
- 1
- Uploads
- 0
There was a report on another forum of an oversized modular. Modification of the lower's ejector was necessary to get the upper to mate properly (it functioned after that). There was conjecture that process might not work for all lowers, since ejector designs vary somewhat.
FWIW, the build where this was encountered was an NFA lower - so in the worst case, remedial modification would be possible with the lowers you and mustang are using.
I hadn't heard of firing pins breaking until you mentioned it.
-
28 December 2015, 18:43 #32
I had to move and bend my ejector to get it to fall into place, but I'm thinking that's not what you're referring to.
As an update, I emailed New Frontier, which is what they basically FORCE you to do to get any service, and they still haven't replied. If their replacement firing pin doesn't beat the RRA's I ordered, they're going to get an ear full.NRA LIFE MEMBER
Veteran Combat Medic
Experience is what you get... When you don't get what you want.
-
30 December 2015, 16:44 #33
-
30 December 2015, 16:50 #34
-
30 December 2015, 16:55 #35
-
31 December 2015, 00:35 #36
More jumping on board with these pistol caliber stuff is nice, I'm definetly in for one ..eventually..
More info.. Lol...
-
31 December 2015, 06:38 #37
As much as I prefer to build my own, the Sig MPX seems like the way to go for a PCC for an AR fanboy.
-
31 December 2015, 08:19 #38
-
31 December 2015, 09:13 #39LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
Here's another company making an 9mm AR variant. I don't know anything about them so please don't take this as an endorsement. I've just heard the name floating around for a while and found out today that they opened a webstore
https://angstadtarms.com/udp-9/
-
31 December 2015, 14:01 #40
-
31 December 2015, 14:27 #41
9mm AR discussion
This is how I plan for my 2016 to go...
From Cross Machine Tool on Instagram.
-
31 December 2015, 15:06 #42
Don't forget the $99 50x scope.
-
31 December 2015, 15:11 #43
-
31 December 2015, 20:53 #44
That's the conclusion i've drawn as well. As much as i love to tinker with my guns, there's an element of satisfaction in taking a firearm out of it's box, loading the mags, and sending lead downrange without having to play engineer to get everything functioning correctly. But...
I'm very curious to see the upcoming CMT set-up."It's time to start slapping people." - George Carlin
NRA Life Member | SAF Life Member | FPC Member
ΜΟΛΩΝ ΛΑΒΕ
-
31 December 2015, 21:09 #45