Results 406 to 420 of 475
Thread: SMOS Build Thread
-
10 March 2016, 17:55 #406
Looks like the lower is threaded to accept a small set screw to tighten the slop between the upper and lower. Does anyone know what the thread pitch for this hole is?
Last edited by JSchell1309; 11 March 2016 at 14:52.
-
12 March 2016, 15:13 #407Member
- Join Date
- Dec 2014
- Location
- Kansas
- Posts
- 58
- Downloads
- 0
- Uploads
- 0
Finally put on my port door, lubed up the bolt/gun and slapped it together. Ordered a set of the MBUS Pro sights. Then time to shoot!!!
JTLast edited by jataylor; 13 March 2016 at 07:21.
-
12 March 2016, 16:17 #408
-
12 March 2016, 19:28 #409
-
13 March 2016, 07:34 #410Member
- Join Date
- Feb 2016
- Location
- St Louis, MO
- Posts
- 35
- Downloads
- 0
- Uploads
- 0
-
13 March 2016, 07:50 #411
-
13 March 2016, 09:35 #412Member
- Join Date
- Feb 2016
- Location
- St Louis, MO
- Posts
- 35
- Downloads
- 0
- Uploads
- 0
-
13 March 2016, 19:54 #413
Grainger is more Lab supplies. I opted for a 10 pack of stainless ones from McMaster after Fastenal couldn't put the order through without error. Ordered product 90291A305 for $7.50 for 10 of them.
Got a chance to sight in both the irons and the Vortex Strike Eagle using bulk Wolf Gold. Bottom middle target you can see the 3 3rd groups I shot to dial the 0 in at 50 yards. Left and right were both 3 rounds to test 0 and top middle is a quick 5 shot before range called cease fire. Extremely happy with the results especially from the stock mil-spec trigger. Larue MBT should only make this better. A few pics of the finished build, don't have anything besides cell phone pics yet.
Last edited by JSchell1309; 13 March 2016 at 20:20.
-
14 March 2016, 05:24 #414Member
- Join Date
- Feb 2016
- Location
- St Louis, MO
- Posts
- 35
- Downloads
- 0
- Uploads
- 0
Nice dude, well done.
Looks great too.
-
14 March 2016, 09:37 #415
Anyone here have the 12" GFY MLOK rail from SMOS yet? I just wanted to know if it was a true 12" or not. Thanks!
Graphic Designer
Instagram: @EO3actual
-
14 March 2016, 09:41 #416Member
- Join Date
- Sep 2009
- Posts
- 76
- Downloads
- 0
- Uploads
- 0
-
14 March 2016, 09:45 #417
-
14 March 2016, 10:36 #418
-
14 March 2016, 10:38 #419
-
14 March 2016, 19:04 #420Member
- Join Date
- Sep 2009
- Posts
- 76
- Downloads
- 0
- Uploads
- 0
SMOS 12.0 comes in at exaclt 10.1oz, and exactly 12.000" long, just as advertised.
This thing's PURTY. The anodizing is BLACK as opposed to my SMOS 308 rail which is kinda more on the grey side...