SMOS Build Thread

[titanse05]

I'll be up there on Friday. If you want to start a thread to gauge interest I'll see what they can do.

Done. Rainier Arms Back Up Iron Sights Group Buy

[Pyzik]

Parallax TiN BCG by Damage Photos, on Flickr


Bling by Damage Photos, on Flickr

[Josh S.]

Parallax TiN BCG by Damage Photos, on Flickr

Oh. Em. Gee.

Pyzik, can I get permission to slightly copy that sexyass build?

[Pyzik]

Oh. Em. Gee.

Pyzik, can I get permission to slightly copy that sexyass build?

Haha, it's a free country!

Sent from my SM-N910V using Tapatalk

[velocity2006]

Super jealous I didn't have the funds to get in on these. Wanted to meet up with SMOS but have not got a response, they are like 20 minutes from my house.

[Deadwing]

Super jealous I didn't have the funds to get in on these. Wanted to meet up with SMOS but have not got a response, they are like 20 minutes from my house.

Responding to emails doesn't seem to be one of their strong suits.

[Deadwing]

Parallax TiN BCG by Damage Photos, on Flickr

Looking good, Pyzik!

[velocity2006]

Responding to emails doesn't seem to be one of their strong suits.

Agreed, unfortunately. I realize they may be busy, but trying to find shooting buddies in this area has been ridiculously hard especially when there are like 4 premier AR makers within 30 minutes of my house. Literally wanted like 20 minutes to take some pictures of their rifles, free marketing for them, oh well...

[fledge]

FYI: I finally got around to filing a form 1 yesterday. The GFY-15 isn't listed on the ATF site yet. They said to expect delays because of it. I submitted an additional picture of the receiver to speed the process.

[Deadwing]

FYI: I finally got around to filing a form 1 yesterday. The GFY-15 isn't listed on the ATF site yet. They said to expect delays because of it. I submitted an additional picture of the receiver to speed the process.

Was this an eForm or paper form? From what i've read, the delays were fairly minimal with eForms when the manufacturer or model wasn't listed as long as a photo was submitted with your application package. Apparently the application would show in a problem status until the photos were reviewed (usually within 48 hours), then it would show submitted/in process. This was a while ago that i read this, and obviously time lines are longer now with 41F. But hopefully this won't add too much delay to your form getting approved.

[fledge]

Eform. I figure adding the pic will let them know it's real, followed by a phone call to SMOS (I hope they don't email SMOS cause I may never get approved! Ha!). I don't expect much delay beyond the current craziness. I submitted a different listed lower at the same time and can compare approval speed times.

[Deadwing]

Eform. I figure adding the pic will let them know it's real, followed by a phone call to SMOS (I hope they don't email SMOS cause I may never get approved! Ha!). I don't expect much delay beyond the current craziness. I submitted a different listed lower at the same time and can compare approval speed times.

LOL! Yeah, if they email SMOS you're doomed. Seriously though, you should be good to go with the photo you submitted. If i recall correctly, someone had submitted a Form 1 on an 80% lower they'd finished along with a photo and it was only 48 hours or something before their application was in process. Post your progress in the "Transfer Times" thread if you get the chance. It's a pretty good resource for keeping track of how long things are taking.

[UWone77]

So far I've decided on a Geissele SSA trigger, Forward Controls ABC, and a 14.5" Rainier CHF Barrel, and that's about it so far.

[Pyzik]

So far I've decided on a Geissele SSA trigger, Forward Controls ABC, and a 14.5" Rainier CHF Barrel, and that's about it so far.

Sounds like awesomeness, as always from you.

Sent from my SM-N910V using Tapatalk

[jataylor]

My pictures aren't near as fancy, but....
-Geissele G2S
-Forward Controls ABC/R
-MOE grip
-BCM RE w/H buffer
-BAD safety
-SOPMOD Bravo
-Sionics LPK
-BCM Mod4 GF handle
-SLR gas block
-ToolCraft 1B1B6 BCG
-Daniel Defense LW 16" barrel
-AAC non-mount Blackout
-Spikes melonited gas tube

JT