Results 16 to 23 of 23
-
10 June 2016, 19:08 #16LEO / MIL
- Join Date
- Aug 2011
- Posts
- 667
- Downloads
- 0
- Uploads
- 0
Still waiting on the RISTA to come out of NFA jail so I haven't tried it suppressed yet.
Over than that the setup seems to be working out well enough. The griffin charging handle and Lantac big make gas a non-issue and the silent capture spring works as advertised. I've only put about 200 rounds through it though, so not a whole bunch of data yet.
The only problem I have is that there is that slight tuning fork sound coming from the flash hider. I'm curious to know how it will sound when it's inside of the suppressor.
I can live with it now but it may be irritating to me after and while and force me to switch to a muzzle brake
-
19 July 2016, 17:36 #17Member
- Join Date
- Nov 2009
- Posts
- 81
- Downloads
- 0
- Uploads
- 0
Mega Wedge Lock carbine length on an 8.3" bbl...
-
19 July 2016, 22:16 #18
-
20 July 2016, 06:09 #19Member
- Join Date
- Nov 2009
- Posts
- 81
- Downloads
- 0
- Uploads
- 0
-
23 January 2017, 08:36 #20
Necropost... but I'm in the same boat and figured I'd just come back here instead of making a new thread.
I'm using the exact same barrel. BA 8.3" Hanson .300
My catch is I'm looking for something with 3 full usable M-lok slots at the 3/6/9 positions, which seems to put me with the Mega Wedge Lock, an 8" SLR, or the 2A rails. I'm kinda leaning towards the 2A because it's the lightest and least expensive, but I'm not so sure after watching the install video and seeing that the rail is secured to the nut with 4 finger tight set screws that don't even thread into the barrel nut. Anyone have any experience with this? Also leaning away from the 8" SLR because that would overhang the muzzle device, and I'd prefer to have that area free in case HPA passes.-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
23 January 2017, 12:45 #21
SLR has 7.5" rails with that configuration. Their ION version adds even more.
The 2a attachments aren't "finger tight." They tighten with hex key. I was skeptical of it at first too but after installing three of them, I've not had a single issue of movement or rotation. Just take your time securing them so that the rail is centered. They bite into the barrel nut grooves, pushing the rail into the receiver.
-
23 January 2017, 13:30 #22-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
23 January 2017, 13:39 #23
Turn the shoulder down to 8", rethread and get an SMR Mk 4. Problem solved!
There's no "Team" in F**K YOU!