Results 61 to 75 of 432
-
4 June 2016, 20:46 #61
Lost my screws for this one... replacements on the way, but it should be a fun 12.5" Faxon/SMOS/Fortis Blaster.
-
5 June 2016, 05:43 #62
I always figured you had a few loose screws...
Clean looking upper.
-
5 June 2016, 18:05 #63
-
5 June 2016, 19:27 #64
Looks like an excuse to build that .260.
-
8 June 2016, 00:52 #65
-
11 June 2016, 23:51 #66
-
1 August 2016, 10:31 #67
Finally breaking her in. Borrowed an optic. Still need to pick something up to finish this thing off.
SMOS Breaking In by Damage Photos, on FlickrGround Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
1 August 2016, 11:02 #68
How well is that flash suppressor working just at suppressing flash?
-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
1 August 2016, 11:09 #69Ground Defense 1, Blade Defense 1, Defensive Pistol 1 & 2, Aliance Shoot House, When Things Go Bad, YSINTG, Carbine 1, DART Medical, NRA Range Safety Officer
david@damagephotos.com
Damage Photos on Facebook
@damage_photos on Instagram
Use DAMAGE15 to save 15% at Third Pin Threads
Save 10% "JOINORDIE" http://cmttac.com/
-
23 August 2016, 20:34 #70
-
29 August 2016, 17:57 #71Contributing Member
- Join Date
- Mar 2015
- Posts
- 119
- Downloads
- 0
- Uploads
- 0
What torque setting did y'all use for the screws that secure the handguard to the barrel nut?
-
29 August 2016, 18:44 #72
-
30 August 2016, 17:05 #73
-
30 August 2016, 17:26 #74
-
30 August 2016, 17:49 #75
Not planning on ever removing the thing? What happens if you decide to cerekote the parts or reconfigure your rifle for whatever reason?
Don't you have to basically melt off red loctite with high heat? (I'm asking not telling)... just wondering if red loctite is something to look into....not that I have a rail (yet) that would need it.