2A Armament XANTHOS-lite large frame .308 receiver set.

[UWone77]

These are now shipping in small batches as we get them off the machines!

BACK ORDERS ARE TYPICALLY 2-3 WEEKS OUT!

The XANTHOS-lite was developed to give the end user a lightweight solution for the popular “large frame” 308 (LR308/SR-25) pattern of firearms. The XANTHOS-lite is geared towards the user who want’s quality material, design, and functionality in a large frame build. The XANTHOS-lite shares the common DPMS HIGH standard for rail height, and will accept most accessories on the market. The lightening cuts on the top of the receiver feature a tapered design to give aftermarket rails a seamless look from receiver to rail. Features such as a tensioning screw, and screw in pin for the bolt release are also included. A generous magazine well aid in reloading. The XANTHOS-lite is sold only as a matched set.



Features:

3-D Machined from U.S.A. Certified 7075-T6 plate aluminum
Pocketed design reduces weight, and enhances appearance
Forward assist has been removed from upper to reduce weight
Bolt release features screw in pin (Included)
Integrated and lightened trigger guard
Machined T-Markings and minimized logo for a clean appearance
Tapered charging handle ramp to eliminate unsightly wear marks
DPMS Standard high rail height
Integrated tensioning screw guaranties a tight fit (included)
Bead blasted and hard coat anodized black (Type3 class2)
Weight: (16oz total) Stripped upper and lower combined
Compatible with most accessories on the market
Product of the great state of Idaho, MADE IN THE U.S.A.
SKU (2A-LFRS-1)


NOTE: Because of the non-standard state of the large frame market, some accessories may not work with the XANTHOS-lite set. Although every effort is made to make our products as compatible as possible, the XANTHOS-lite can not be guaranteed to work with all products on the market.

MSRP: $689


http://www.2a-arms.com/collections/r...e-receiver-set

[Ratfink]

Must have it. I couldn't have seen this at a better time.


Sent from my iPhone using Tapatalk

[fledge]

This deserves a WEVO group buy with matching rail.

[UWone77]

This deserves a WEVO group buy with matching rail.

Ha... the 2A guys do check in once in awhile here. I've always wanted a 5.56 set.

[fledge]

Ryan has said he'd like to do a group buy for us. This set matches WEVO's mission very well.

I have a 556 set. Machining and design is amazing.

[Naytwan]

Vert nice.

[SINNER]

Nice looking set but the lightened part makes me laugh on a .308 pattern rifle. All those relief cuts likely saves about the same weight as an inch of barrel length.

[fledge]

Description says, the weight of this set is 1lb. That's the equivalent of a Mega maten stripped lower alone.

[UWone77]

Description says, the weight of this set is 1lb. That's the equivalent of a Mega maten stripped lower alone.

These definitely look great, and no doubt typical 2A quality... but not sure how much weight I'm looking to save on a 308 set though. That's why I've always wanted one of their 5.56 sets.

[Joelski]

Curious guy question: how come you almost never see .308 receivers with forward assist? I know Armalites had them, but they are as common as hens teeth anymore. Is this d/t evolution, or lack of need/ low ftf rate? Both?

[fledge]

Their aim is a 7lb rifle. I find lightweight for the larger bore even more practical for walking in the woods.

[mustangfreek]

Their aim is a 7lb rifle. I find lightweight for the larger bore even more practical for walking in the woods.

That would be nice I just built a 16" bo and its as heavy or heavier then my last hunting gun-ruger m77 7mm..as it wasn't what I wanted to build but it happened and now not real sure about the long barrel bo idea with no can

Anyways nice looking set here, and it does say complete upper and lower 1 lb, that's light but like sinner says you can just get a shorter barrel and save some coin, $700 for this set, and then your gonna want some other bad ass parts , gonna add up fast $$$

[Brahmzy]

Nobody said custom, quality, lightweight 308s were inexpensive. I just built a 7.5lb MATEN and it was a pricey build.
Lots of V7 parts.

[fledge]

You can get lightweight 16" 308 barrels which maximizes weight even more (Faxon 16" barrel is 2lb). Scope weight would be free with such weight savings.

For me it's either this or the Mega SF-Maten for a lightweight 308. A group buy of receivers with rail would push me toward 2A cause it has cleaner lines.

[UWone77]

I wonder what a group buy price would be. Last thing I need is another receiver set, but I guess that's never stopped me before.