Results 16 to 30 of 33
-
24 April 2016, 09:57 #16Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
Maybe I will rethink the rail then...
-
24 April 2016, 10:09 #17
I agree. The NSR barrel but is crap and the main reason I have 1 or 2 installed. The rest got replaced for other rails like Geissele as Slippers mentioned.
I know SMOS was looking at redesigning the barrel nut when they were making NSRs
-
24 April 2016, 10:31 #18
Seems like the Helix is closer in price-point to the original KMR than the Alpha. You can get the 13" KMR-A for around $160 if you look around and I suspect it would be hard to find the Helix 13.7 for much less than $220.
For all the talk of the M-LOK being cheaper to manufacturer, it's interesting to see that the M-LOK Helix cost $5 more than the KeyMod.
-
24 April 2016, 11:17 #19
That's an apples/oranges comparison. Helix doesn't merely machine mlok slots.
-
24 April 2016, 11:44 #20Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
https://www.odinworks.com/O2_Lite_KM...f-12-km-o2.htm
I would also be interested in trying this new rail system as well. I wonder how strong it actually is?
-
24 April 2016, 13:52 #21
Guess you could always split the difference and get a KMR Alpha and install it with a V7 Ti barrel nut, then you'd have the stronger forend and only be an oz more than the lighter one.
-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
24 April 2016, 17:33 #22
I agree the barrel nut sucks with the NSR, but it's also something that you're probably only going to have to mess with once. I wouldn't walk away from the NSR rail just because of it. Compared to installing a KAC URX 4 over a pinned gas block, the Noveske is a walk in the park.
-
24 April 2016, 18:58 #23
Comparing the 13.7" Helix M-LOK ( http://slrrifleworks.com/index.php?r...1#!prettyPhoto )to the 13.7" Helix KeyMod ( http://slrrifleworks.com/index.php?r...product_id=720 ) is apples/oranges?
-
24 April 2016, 19:25 #24Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
-
24 April 2016, 19:54 #25
Both are in stock at Rainier in all lengths.
https://www.rainierarms.com/upper/ha.../slrrifleworks-One Nation, Under God
-"The bad news is time flies. The good news is you're the pilot." ~ Michael Althsuler
-
24 April 2016, 20:31 #26
-
29 April 2016, 17:50 #27Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
Okay so update...
Since I finished my lower off I started getting parts for my upper. Just picked up a Noveske MUR upper and 13.5" NSR rail. Now I just need to find the right barrel for this build.
-
29 April 2016, 18:57 #28
Look for a 14.5" Afghan if you can find one, that is what I would try to find if I were building that upper and rail combo.
-
30 April 2016, 03:18 #29Senior Member
- Join Date
- May 2013
- Posts
- 820
- Downloads
- 0
- Uploads
- 0
-
6 May 2016, 12:35 #30Senior Member
- Join Date
- Apr 2014
- Posts
- 534
- Downloads
- 0
- Uploads
- 0
What's the problem with the NSR barrel nut?