Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2016
    Posts
    4
    Downloads
    0
    Uploads
    0

    EOTech 551/553/XPS Measurements

    Hello. I've been doing a lot of 3D design recently and I'd like to be able to make a set of 1/35 EoTech 551s, 553s and XPS' as none are available in 1/35 as of yet. Problem is, I don't have any of these optics in front of me to design and get measurements off of. I'm wondering if anyone who has these optics could work with me to provide basic detail measurements so I could design a set of these quickly. Thank you.

  2. #2
    Join Date
    Apr 2009
    Location
    Central Florida - Gulf Side
    Posts
    2,219
    Downloads
    2
    Uploads
    2
    Sorry, I sent all mine back to EoTech. WIth the optional recall, I'm not sure how many members kept theirs. Be patient, someone will chime in.
    NRA Benefactor Member
    NRA Certified Instructor

    "I won't be wronged, I won't be insulted, and I won't be laid a hand on."
    John Wayne - "The Shootist"

  3. #3
    Join Date
    Jun 2016
    Posts
    4
    Downloads
    0
    Uploads
    0
    I didn't realize there was a recall on those models. Whats the reason?

  4. #4
    Join Date
    Mar 2013
    Location
    The Unfree State (MD)
    Posts
    2,731
    Downloads
    3
    Uploads
    0
    Known parallax error and thermal shift.

  5. #5
    Join Date
    Jun 2016
    Posts
    4
    Downloads
    0
    Uploads
    0
    Ah. Well that is a pretty good reason. Nuts.

  6. #6
    Join Date
    Jun 2007
    Posts
    5,596
    Downloads
    0
    Uploads
    0
    From the EoTech website

    Looks like for the 553:

    Length/Width/Height:
    4.9” x 2.2” x 2.8” (124 x 55.8 x 71 mm)

    Not sure about the 551 though. Not too many floating around as they used the N battery. The 511 also has the same dimensions but I can't seem to find specs on that either.

  7. #7
    Join Date
    Jun 2016
    Posts
    4
    Downloads
    0
    Uploads
    0
    Thanks. It's a good start, the general dimensions. Now I just need the specific dimensions. Time to keep waiting I suppose.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •