Results 1 to 8 of 8
-
22 June 2016, 15:26 #1
Midwest Ind Gen 3 Handguard Installation Video
Hello Everyone,
We received some Gen 3 hand guards from the awesome folks at Midwest Industries for a review. Sneak peak, they are awesome. Before we publish our review we filmed and produced an instruction installation video. Installation is easy and this video is more aimed at an online course versus a quick down and dirty throw this together.
Hope this can be a reference for folks.
Thanks!
Dave
-
23 June 2016, 07:53 #2
Dave, not sure if the problem is on my end or not, but the video ran 15 seconds and stopped at the screen shown in the link.
NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
23 June 2016, 08:44 #3
-
23 June 2016, 09:01 #4
I tried it on IE and the 15 second video is their ad. After the ad plays the video starts properly on IE.
Oh, and very nicely done Dave - Thanks !NRA Benefactor Member
NRA Certified Instructor
"I won't be wronged, I won't be insulted, and I won't be laid a hand on."
John Wayne - "The Shootist"
-
25 June 2016, 19:10 #5
Thanks for letting them know. I know they upgraded their player recently not sure if that changed embedding code etc. in the future I'll be using YouTube more often.
-
26 June 2016, 18:32 #6
Nice video Dave. Is that green block for gas blocks only? I haven't seen it before. I only have the orange one from Brownells for FSB's. I'll have to go look.
-
27 June 2016, 06:16 #7
It is the bench block from Brownells, not just for gas blocks. I use it quite often for various jobs and certainly isn't limited to gas blocks. It's a great tool to have around for pin work, as a brace, or just to hold round stuff. I've had it for years and it holds up great, I use the FSB block too and it makes that Jon so much easier.
-
27 June 2016, 06:16 #8